[Fri May  4 10:56:41 2012] Detection parameters:
  Position = (302.2, 277.0) = 17 52 9.88 -22 20 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9478.3 +/- 149.3
  Background counts = 348.7
  Rate = 0.2 +/- 0.004

[Fri May  4 10:56:52 2012] Off-axis axis estimate = 1.58'
[Fri May  4 11:17:03 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri May  4 11:17:03 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri May  4 11:17:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.805
[Fri May  4 11:17:03 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.22"
[Mon May  7 04:36:44 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May  7 04:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src11.csv
[Mon May  7 04:36:44 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May  7 04:36:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src11.csv
[Mon May  7 04:36:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 04:36:45 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May  7 04:36:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May  7 04:36:45 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May  7 04:36:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May  7 04:36:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653110101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 07:48:46 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Mon May  7 07:48:46 2012] Vigneting correction estimate = 1.000000
[Mon May  7 07:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 07:48:46 2012] Assessing source extent using major
[Mon May  7 07:48:46 2012] Source does appear to be extended
[Mon May  7 07:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 07:48:46 2012] Source is confused with source 1
[Mon May  7 07:49:11 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Mon May  7 07:49:11 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Mon May  7 07:49:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.805
[Mon May  7 07:49:11 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.22"
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src11.ximg exists
[Fri May 11 07:50:36 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May 11 07:50:36 2012] Fit fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_src11 appears to have run properly
[Fri May 11 07:50:37 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May 11 07:50:37 2012] fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 11 07:50:37 2012] Fit fullrun_mos1_xmm0653110101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri May 11 15:43:34 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Fri May 11 15:43:34 2012] Vigneting correction estimate = 1.000000
[Fri May 11 15:43:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 15:43:34 2012] Assessing source extent using major
[Fri May 11 15:43:34 2012] Source does appear to be extended
[Fri May 11 15:43:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 15:43:56 2012] Counts = 9478.299805, rescaling region sizes by 2.000000
[Fri May 11 15:43:56 2012] XMMSAS src. selection expression = ellipse(26245.566711, 24053.309021, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 11 15:43:56 2012] Writing source region out to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src12_src.reg
[Fri May 11 15:43:56 2012] Extracting stamp from image fullrun_mos1_xmm0653110101_pi300-10000_cl_sm2.00.img.gz, (227, 202) - (377, 352)
[Fri May 11 15:43:56 2012] XMMSAS bgd. selection expression = annulus(26245.566711, 24053.309021, 4350.000000, 8700.000000, X, Y) && !ellipse(25829.258000, 24325.349000, 3463.968100, 3463.968100, 0.000000, X, Y) && !ellipse(24798.506000, 24176.320000, 4592.064132, 4592.064132, 0.000000, X, Y) && !ellipse(24870.899600, 24305.912480, 4340.304125, 3846.864111, 143.001000, X, Y) && !ellipse(24744.366000, 22971.468000, 1274.304037, 465.162413, 0.014000, X, Y) && !ellipse(24654.859009, 25653.800507, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25757.160797, 25658.781342, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27274.844000, 26074.866000, 1090.416031, 1090.416031, 0.000000, X, Y) && !ellipse(23983.094116, 25656.280304, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22952.734000, 25537.870000, 389.947211, 389.947211, 0.000000, X, Y) && !ellipse(22394.822000, 26206.968000, 1223.360035, 1223.360035, 0.000000, X, Y) && !ellipse(27379.073059, 25355.882324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21611.144043, 24249.441345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.764313, 23797.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.190887, 22765.550781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.674988, 22685.610504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.433624, 22754.104950, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23923.254000, 22855.422000, 311.430409, 311.430409, 0.000000, X, Y) && !ellipse(27486.399963, 22361.144684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.894089, 22145.837738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.687531, 22309.350372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.949921, 22293.664459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24491.136660, 21906.140000, 3894.744112, 3894.744112, 0.000000, X, Y) && !ellipse(23570.699036, 22191.163071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25402.634000, 25179.160000, 3146.040091, 3146.040091, 0.000000, X, Y) && !ellipse(26443.726000, 21848.250000, 1269.496037, 1269.496037, 0.000000, X, Y) && !ellipse(21698.494507, 21429.362152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21714.058289, 27003.638641, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 15:43:56 2012] Writing fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src12.gif
[Fri May 11 18:14:12 2012] Mean detx,y = (308.11, -852.30) 
[Fri May 11 18:14:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 18:18:43 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 18:18:43 2012] Setting source spectrum file to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri May 11 18:18:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 13 00:28:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 13 00:28:07 2012] rmf not generated due to insufficient counts
[Sun May 13 12:18:48 2012] Updating aperture counts using extracted products
[Sun May 13 12:18:48 2012] Error reading totcts from fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 13 12:18:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 13 12:18:50 2012] Using photon index=1.80, rate=0.246, arf fullrun_mos1_xmm0653110101_pi300-10000_pass1_cl_src12.arf
[Sun May 13 12:18:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 13 12:18:50 2012] Updating source flux to 2.3e-12
[Sun May 13 12:18:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting