[Sun May 12 06:52:21 2013] Detection parameters:
  Position = (163.4, 169.0) = 20 11 38.55 -56 35 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.2 +/- 26.8
  Background counts = 164.7
  Rate = 0.002 +/- 0.0004

[Sun May 12 06:52:22 2013] Off-axis axis estimate = 13.56'
[Sun May 12 06:52:51 2013] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:51 2013] Initial guess for spatial extent in simple fitting = 13.21"
[Sun May 12 06:52:51 2013] source mask rpix=3.0, npix_max = 50, mask sum = 55, frac = 1.099
[Sun May 12 06:52:51 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 13.21"
[Sun May 12 06:52:54 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 12 06:52:54 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 12 06:52:54 2013] Fit fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src25 appears to have run properly
[Sun May 12 06:52:55 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 12 06:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 12 06:52:55 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 12 06:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun May 12 06:52:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:13 2013] Spatial fit model total counts = 971.380000, observed total counts = 1053.000000
[Sun May 12 06:53:13 2013] Offset between fit and detection position for source 27 = 0.937056 pixels
[Sun May 12 06:53:13 2013] 987.533000 total counts/ 858.505000 bgd. counts: snr = 4.403648
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.937056 pixels
  Position = (163.4, 169.9) = 20 11 38.51 -56 35 9.7
  Extent = 6.8" x 6.8", rotation angle = 0
  Source counts = 129.0 +/- 31.4
  Background counts = 858.5
  Rate = 0.002 +/- 0.0005
[Sun May 12 06:53:13 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:13 2013] Assessing source extent using major
[Sun May 12 06:53:13 2013] Source does appear to be extended
[Sun May 12 06:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:40 2013] Initial guess for spatial extent in simple fitting = 6.84"
[Sun May 12 06:53:40 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.164
[Sun May 12 06:53:40 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 6.84"
[Sun May 12 06:53:41 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src25.ximg exists
[Sun May 12 06:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src25.csv
[Sun May 12 06:53:41 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun May 12 06:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src25.csv
[Sun May 12 06:53:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:42 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun May 12 06:53:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun May 12 06:53:42 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun May 12 06:53:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun May 12 06:53:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:59 2013] Spatial fit model total counts = 908.068000, observed total counts = 820.000000
[Sun May 12 06:53:59 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 06:53:59 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:59 2013] Assessing source extent using major
[Sun May 12 06:53:59 2013] Source does appear to be extended
[Sun May 12 06:53:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:54:25 2013] XMMSAS src. selection expression = ellipse(14170.641100, 14734.752506, 410.505012, 410.505012, 0.000000, X, Y)
[Sun May 12 06:54:25 2013] Not overwriting source region fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src.reg
[Sun May 12 06:54:25 2013] Extracting stamp from image fullrun_pn_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (140, 146) - (187, 194)
[Sun May 12 06:54:25 2013] XMMSAS bgd. selection expression = annulus(14170.641100, 14734.752506, 684.175020, 1368.350039, X, Y) && !ellipse(16000.318420, 13915.124786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15430.517273, 13987.694702, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 06:54:25 2013] Writing fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27.gif
[Sun May 12 06:54:29 2013] ../../xmm0653050801/products/events/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0653050801/products/events/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun May 12 06:54:29 2013] Mean detx,y = (-11974.49, 13447.24) 
[Sun May 12 06:54:29 2013] ../../xmm0653050801/products/images/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src.img and ../../xmm0653050801/products/images/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun May 12 06:54:29 2013] ../../xmm0653050801/products/spectra/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0653050801/products/spectra/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun May 12 06:54:29 2013] Setting source spectrum file to fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May 12 06:54:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May 12 06:54:29 2013] ../../xmm0653050801/products/lightcurves/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0653050801/products/lightcurves/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun May 12 09:06:40 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:40 2013] Total counts from fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 301.00
[Sun May 12 09:06:40 2013] Total counts from fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi.gz = 912.00
[Sun May 12 09:06:40 2013] Got source and background scale factors 532800.000000, 1420630.000000
[Sun May 12 09:06:40 2013] User source parameters:
  Position = (163.4, 169.9) = 20 11 38.51 -56 35 9.7
  Extent = 6.8" x 6.8", rotation angle = 0
  Source aperture counts = -41.0 +/- 18.4
  Background aperture counts = 342.0
  Rate = -0.0007 +/- 0.0003

[Sun May 12 09:06:45 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:45 2013] Using photon index=1.80, rate=0.00218, arf fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27.arf
[Sun May 12 09:06:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:45 2013] Updating source flux to 2.5e-14
[Sun May 12 09:07:10 2013] Flag p found in src. 27 procflags, skipping spectral fitting
[Sun May 12 09:07:16 2013] xmm0653050801/analysis//spectral/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete