[Sun May 12 06:52:20 2013] Detection parameters:
  Position = (298.1, 409.9) = 20 10 27.60 -56 17 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 382.2 +/- 29.6
  Background counts = 206.3
  Rate = 0.005 +/- 0.0004

[Sun May 12 06:52:22 2013] Off-axis axis estimate = 8.08'
[Sun May 12 06:52:51 2013] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:51 2013] Initial guess for spatial extent in simple fitting = 10.47"
[Sun May 12 06:52:51 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Sun May 12 06:52:51 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.47"
[Sun May 12 06:52:52 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 12 06:52:52 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 12 06:52:52 2013] Fit fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src13 appears to have run properly
[Sun May 12 06:52:55 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 12 06:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 12 06:52:55 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 12 06:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 12 06:52:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:13 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.420942 pixels away
[Sun May 12 06:53:13 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:13 2013] Assessing source extent using major
[Sun May 12 06:53:13 2013] Source does appear to be extended
[Sun May 12 06:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:40 2013] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:40 2013] Initial guess for spatial extent in simple fitting = 10.47"
[Sun May 12 06:53:40 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.888
[Sun May 12 06:53:40 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.47"
[Sun May 12 06:53:41 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 12 06:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src13.csv
[Sun May 12 06:53:41 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 12 06:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src13.csv
[Sun May 12 06:53:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:42 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 12 06:53:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 12 06:53:42 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 12 06:53:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 12 06:53:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:59 2013] Spatial fit model total counts = 867.930000, observed total counts = 641.000000
[Sun May 12 06:53:59 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 06:53:59 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:59 2013] Assessing source extent using major
[Sun May 12 06:53:59 2013] Source does appear to be extended
[Sun May 12 06:53:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:54:25 2013] XMMSAS src. selection expression = ellipse(25885.842102, 35611.676392, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 06:54:25 2013] Not overwriting source region fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src.reg
[Sun May 12 06:54:25 2013] Extracting stamp from image fullrun_pn_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (261, 372) - (336, 447)
[Sun May 12 06:54:25 2013] XMMSAS bgd. selection expression = annulus(25885.842102, 35611.676392, 1087.500000, 2175.000000, X, Y) && !ellipse(24367.818481, 38389.848602, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 06:54:25 2013] Writing fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15.gif
[Sun May 12 06:54:27 2013] ../../xmm0653050801/products/events/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0653050801/products/events/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun May 12 06:54:28 2013] Mean detx,y = (-1705.87, -8194.86) 
[Sun May 12 06:54:28 2013] ../../xmm0653050801/products/images/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src.img and ../../xmm0653050801/products/images/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun May 12 06:54:28 2013] ../../xmm0653050801/products/spectra/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0653050801/products/spectra/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun May 12 06:54:28 2013] Setting source spectrum file to fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun May 12 06:54:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 12 06:54:28 2013] ../../xmm0653050801/products/lightcurves/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0653050801/products/lightcurves/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun May 12 07:10:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 07:10:27 2013] rmf not generated due to insufficient counts
[Sun May 12 09:06:37 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:37 2013] Total counts from fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 564.00
[Sun May 12 09:06:37 2013] Total counts from fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_bgd.pi.gz = 2792.00
[Sun May 12 09:06:37 2013] Got source and background scale factors 1101882.000000, 8959738.000000
[Sun May 12 09:06:37 2013] User source parameters:
  Position = (298.1, 409.9) = 20 10 27.60 -56 17 46.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 220.6 +/- 24.8
  Background aperture counts = 343.4
  Rate = 0.004 +/- 0.0004

[Sun May 12 09:06:37 2013] Updating counts from extracted products
[Sun May 12 09:06:37 2013] Set source signif. to 220.64/18.53 = 11.91
[Sun May 12 09:06:45 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:45 2013] Using photon index=1.80, rate=0.00372, arf fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15.arf
[Sun May 12 09:06:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:45 2013] Updating source flux to 2.2e-14
[Sun May 12 09:07:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 09:07:16 2013] xmm0653050801/analysis//spectral/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete