[Sun May 12 06:52:19 2013] Detection parameters:
  Position = (332.4, 193.3) = 20 10 9.53 -56 33 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1942.8 +/- 55.8
  Background counts = 227.3
  Rate = 0.03 +/- 0.0007

[Sun May 12 06:52:22 2013] Off-axis axis estimate = 8.01'
[Sun May 12 06:52:51 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 06:52:51 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Sun May 12 06:52:51 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.893
[Sun May 12 06:52:51 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.43"
[Sun May 12 06:52:52 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 12 06:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src1.csv
[Sun May 12 06:52:52 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 12 06:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src1.csv
[Sun May 12 06:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:52:55 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 06:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 06:52:55 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 06:52:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 06:52:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:13 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.771577 pixels away
[Sun May 12 06:53:13 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:13 2013] Assessing source extent using major
[Sun May 12 06:53:13 2013] Source does appear to be extended
[Sun May 12 06:53:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:40 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 06:53:40 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Sun May 12 06:53:40 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.893
[Sun May 12 06:53:40 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.43"
[Sun May 12 06:53:41 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 12 06:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src1.csv
[Sun May 12 06:53:41 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 12 06:53:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src1.csv
[Sun May 12 06:53:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:42 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 06:53:42 2013] fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 06:53:42 2013] Fit fullrun_pn_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 12 06:53:59 2013] Spatial fit model total counts = 3059.790000, observed total counts = 2818.000000
[Sun May 12 06:53:59 2013] Offset between fit and detection position for source 1 = 0.182439 pixels
[Sun May 12 06:53:59 2013] 3062.030000 total counts/ 1743.440000 bgd. counts: snr = 31.579575
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.182439 pixels
  Position = (332.5, 193.5) = 20 10 9.51 -56 33 28.4
  Extent = 6.0 (5.7-6.3)", rotation angle = 0
  Source counts = 1318.6 +/- 55.3
  Background counts = 1743.4
  Rate = 0.02 +/- 0.0009
[Sun May 12 06:53:59 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:59 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:53:59 2013] Source does appear to be extended
[Sun May 12 06:53:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:54:25 2013] Counts = 1318.590000, rescaling region sizes by 2.000000
[Sun May 12 06:54:25 2013] XMMSAS src. selection expression = ellipse(28876.945800, 16784.623000, 719.434821, 719.434821, 0.000000, X, Y)
[Sun May 12 06:54:25 2013] Not overwriting source region fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src.reg
[Sun May 12 06:54:25 2013] Extracting stamp from image fullrun_pn_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (291, 152) - (374, 235)
[Sun May 12 06:54:25 2013] XMMSAS bgd. selection expression = annulus(28876.945800, 16784.623000, 2398.116069, 4796.232138, X, Y) && !ellipse(29445.317749, 21178.898636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26584.709534, 20700.718567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24181.852264, 14424.480209, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 06:54:25 2013] Writing fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1.gif
[Sun May 12 06:54:26 2013] ../../xmm0653050801/products/events/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0653050801/products/events/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun May 12 06:54:26 2013] Mean detx,y = (2514.72, 10367.87) 
[Sun May 12 06:54:26 2013] ../../xmm0653050801/products/images/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src.img and ../../xmm0653050801/products/images/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun May 12 06:54:26 2013] ../../xmm0653050801/products/spectra/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0653050801/products/spectra/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun May 12 06:54:26 2013] Setting source spectrum file to fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 12 06:54:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 12 06:54:26 2013] ../../xmm0653050801/products/lightcurves/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0653050801/products/lightcurves/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun May 12 09:06:34 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:34 2013] Total counts from fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 2273.00
[Sun May 12 09:06:34 2013] Total counts from fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 21536.00
[Sun May 12 09:06:34 2013] Got source and background scale factors 1404258.000000, 41948173.000000
[Sun May 12 09:06:34 2013] User source parameters:
  Position = (332.5, 193.5) = 20 10 9.51 -56 33 28.4
  Extent = 6.0 (5.7-6.3)", rotation angle = 0
  Source aperture counts = 1552.1 +/- 48.7
  Background aperture counts = 720.9
  Rate = 0.03 +/- 0.0008

[Sun May 12 09:06:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:44 2013] Using photon index=1.80, rate=0.0222, arf fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1.arf
[Sun May 12 09:06:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:44 2013] Updating source flux to 1.6e-13
[Sun May 12 09:07:16 2013] xmm0653050801/analysis//spectral/fullrun_pn_xmm0653050801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete