[Sun May 12 06:52:24 2013] Detection parameters:
  Position = (258.0, 123.3) = 20 10 48.73 -56 38 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.5 +/- 17.8
  Background counts = 53.8
  Rate = 0.001 +/- 0.0002

[Sun May 12 06:52:27 2013] Off-axis axis estimate = 13.03'
[Sun May 12 06:52:57 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:57 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Sun May 12 06:52:57 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.890
[Sun May 12 06:52:57 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 12.95"
[Sun May 12 06:52:58 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 12 06:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src23.csv
[Sun May 12 06:52:58 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 12 06:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src23.csv
[Sun May 12 06:52:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:52:59 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 12 06:52:59 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 12 06:52:59 2013] Fit fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 12 06:53:26 2013] Spatial fit model total counts = 659.567000, observed total counts = 626.000000
[Sun May 12 06:53:26 2013] Offset between fit and detection position for source 9 = 0.830010 pixels
[Sun May 12 06:53:26 2013] 585.481973 total counts/ 0.115973 bgd. counts: snr = 1718.893810
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.830010 pixels
  Position = (258.8, 122.9) = 20 10 48.33 -56 38 35.3
  Extent = 25.9 (25.8-51.8)", rotation angle = 0
  Source counts = 585.4 +/- 24.2
  Background counts = 0.1
  Rate = 0.008 +/- 0.0003
[Sun May 12 06:53:26 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:26 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:53:26 2013] Source does appear to be extended
[Sun May 12 06:53:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:26 2013] Source is confused with source 5
[Sun May 12 06:53:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 06:53:43 2013] Initial guess for spatial extent in simple fitting = 25.89"
[Sun May 12 06:53:43 2013] source mask rpix=6.0, npix_max = 166, mask sum = 108, frac = 0.649
[Sun May 12 06:53:43 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 25.89"
[Sun May 12 06:53:44 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src23.ximg exists
[Sun May 12 06:53:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src23.csv
[Sun May 12 06:53:44 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May 12 06:53:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src23.csv
[Sun May 12 06:53:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:46 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May 12 06:53:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun May 12 06:53:46 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May 12 06:53:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun May 12 06:53:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:54:12 2013] Warning, spatial fit 23 centroid is now closest to src. 31
[Sun May 12 06:54:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:54:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:54:12 2013] Source does appear to be extended
[Sun May 12 06:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 08:07:15 2013] XMMSAS src. selection expression = ellipse(22465.815200, 10644.570400, 1553.442045, 1553.442045, 0.000000, X, Y)
[Sun May 12 08:07:15 2013] Writing source region out to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9_src.reg
[Sun May 12 08:07:15 2013] Extracting stamp from image fullrun_mos2_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (170, 34) - (348, 212)
[Sun May 12 08:07:15 2013] XMMSAS bgd. selection expression = annulus(22465.815200, 10644.570400, 2589.070074, 5178.140149, X, Y) && !ellipse(22700.315000, 12043.800800, 382.457611, 382.457611, 0.000000, X, Y) && !ellipse(24501.612000, 10447.432000, 2052.408059, 2052.408059, 0.000000, X, Y) && !ellipse(21545.795580, 12541.962600, 966.776028, 966.776028, 0.000000, X, Y) && !ellipse(21583.770691, 10746.138901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.963348, 11424.558624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.321472, 10664.869118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23089.440460, 12343.642151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21067.797607, 10840.067863, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 08:07:15 2013] Writing fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9.gif
[Sun May 12 08:14:32 2013] Mean detx,y = (3413.28, -16504.82) 
[Sun May 12 08:14:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 08:15:21 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 08:15:21 2013] Setting source spectrum file to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May 12 08:15:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun May 12 09:06:54 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:54 2013] Total counts from fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 1867.00
[Sun May 12 09:06:54 2013] Total counts from fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9_bgd.pi.gz = 8669.00
[Sun May 12 09:06:54 2013] Got source and background scale factors 4288868.000000, 22387144.000000
[Sun May 12 09:06:54 2013] User source parameters:
  Position = (258.8, 122.9) = 20 10 48.33 -56 38 35.3
  Extent = 25.9 (25.8-51.8)", rotation angle = 0
  Source aperture counts = 206.2 +/- 44.2
  Background aperture counts = 1660.8
  Rate = 0.003 +/- 0.0006

[Sun May 12 09:06:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:58 2013] Using photon index=1.80, rate=0.00808, arf fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9.arf
[Sun May 12 09:06:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:58 2013] Updating source flux to 2.6e-13
[Sun May 12 09:07:03 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Sun May 12 09:07:09 2013] xmm0653050801/analysis//spectral/fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete