[Sun May 12 06:52:26 2013] Detection parameters:
  Position = (354.2, 313.2) = 20 9 58.20 -56 24 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.5 +/- 17.0
  Background counts = 68.7
  Rate = 0.002 +/- 0.0002

[Sun May 12 06:52:27 2013] Off-axis axis estimate = 4.18'
[Sun May 12 06:52:57 2013] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:57 2013] Initial guess for spatial extent in simple fitting = 8.52"
[Sun May 12 06:52:57 2013] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.952
[Sun May 12 06:52:57 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.52"
[Sun May 12 06:52:58 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src18.ximg exists
[Sun May 12 06:52:58 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun May 12 06:52:58 2013] Fit fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src18 appears to have run properly
[Sun May 12 06:52:59 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun May 12 06:52:59 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun May 12 06:52:59 2013] Fit fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun May 12 06:53:26 2013] Source 32 is offset by -6.945336 and 2.036964 pixels which is larger than
2 X fitted extent = 1.048055 x 1.048055, not incorporating fit results
[Sun May 12 06:53:26 2013] Spatial fit model total counts = 537.293000, observed total counts = 534.000000
[Sun May 12 06:53:26 2013] Offset between fit and detection position for source 32 = 0.288982 pixels
[Sun May 12 06:53:26 2013] 535.619000 total counts/ 480.498000 bgd. counts: snr = 2.514614
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.288982 pixels
  Position = (353.9, 313.0) = 20 9 58.34 -56 24 48.3
  Extent = 4.1 (2.9-5.5)", rotation angle = 0
  Source counts = 55.1 +/- 23.1
  Background counts = 480.5
  Rate = 0.0008 +/- 0.0003
[Sun May 12 06:53:26 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:26 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:53:26 2013] Source does appear to be extended
[Sun May 12 06:53:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:43 2013] Initial guess for spatial extent in simple fitting = 4.11"
[Sun May 12 06:53:43 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.718
[Sun May 12 06:53:43 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 4.11"
[Sun May 12 06:53:44 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 12 06:53:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src18.csv
[Sun May 12 06:53:44 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 12 06:53:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src18.csv
[Sun May 12 06:53:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:46 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 12 06:53:46 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 12 06:53:46 2013] Fit fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun May 12 06:54:12 2013] Spatial fit model total counts = 537.276000, observed total counts = 534.000000
[Sun May 12 06:54:12 2013] Offset between fit and detection position for source 32 = 0.003567 pixels
[Sun May 12 06:54:12 2013] 535.569900 total counts/ 479.740000 bgd. counts: snr = 2.548965
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.003567 pixels
  Position = (353.9, 313.0) = 20 9 58.34 -56 24 48.3
  Extent = 4.2 (2.9-5.6)", rotation angle = 0
  Source counts = 55.8 +/- 23.1
  Background counts = 479.7
  Rate = 0.0008 +/- 0.0003
[Sun May 12 06:54:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:54:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:54:12 2013] Source does appear to be extended
[Sun May 12 06:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 08:07:14 2013] XMMSAS src. selection expression = ellipse(30741.895960, 27183.890600, 251.625607, 251.625607, 0.000000, X, Y)
[Sun May 12 08:07:14 2013] Writing source region out to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32_src.reg
[Sun May 12 08:07:14 2013] Extracting stamp from image fullrun_mos2_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (339, 299) - (368, 327)
[Sun May 12 08:07:14 2013] XMMSAS bgd. selection expression = annulus(30741.895960, 27183.890600, 419.376012, 838.752024, X, Y)
[Sun May 12 08:07:14 2013] Writing fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32.gif
[Sun May 12 08:13:08 2013] Mean detx,y = (-3515.45, 6.00) 
[Sun May 12 08:13:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 08:13:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 08:13:16 2013] Setting source spectrum file to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun May 12 08:13:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun May 12 08:46:52 2013] Not generating rmf since there are only 55 counts
[Sun May 12 08:46:52 2013] rmf not generated due to insufficient counts
[Sun May 12 09:06:53 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:53 2013] Total counts from fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 100.00
[Sun May 12 09:06:53 2013] Total counts from fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32_bgd.pi.gz = 399.00
[Sun May 12 09:06:53 2013] Got source and background scale factors 186488.000000, 1593160.000000
[Sun May 12 09:06:53 2013] User source parameters:
  Position = (353.9, 313.0) = 20 9 58.34 -56 24 48.3
  Extent = 4.2 (2.9-5.6)", rotation angle = 0
  Source aperture counts = 53.3 +/- 11.0
  Background aperture counts = 46.7
  Rate = 0.0007 +/- 0.0002

[Sun May 12 09:06:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:58 2013] Using photon index=1.80, rate=0.000771, arf fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32.arf
[Sun May 12 09:06:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:58 2013] Updating source flux to 1.4e-14
[Sun May 12 09:07:03 2013] Flag b found in src. 32 procflags, skipping spectral fitting
[Sun May 12 09:07:03 2013] Source 32 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 09:07:09 2013] xmm0653050801/analysis//spectral/fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete