[Sun May 12 06:52:25 2013] Detection parameters:
  Position = (250.0, 349.9) = 20 10 52.78 -56 22 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 14.7
  Background counts = 64.0
  Rate = 0.001 +/- 0.0003

[Sun May 12 06:52:27 2013] Off-axis axis estimate = 5.12'
[Sun May 12 06:52:57 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:57 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Sun May 12 06:52:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.138
[Sun May 12 06:52:57 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.99"
[Sun May 12 06:52:58 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src33.ximg exists
[Sun May 12 06:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src33.csv
[Sun May 12 06:52:58 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun May 12 06:52:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src33.csv
[Sun May 12 06:52:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:02 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun May 12 06:53:02 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun May 12 06:53:02 2013] Fit fullrun_mos2_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun May 12 06:53:26 2013] Spatial fit model total counts = 558.468000, observed total counts = 529.000000
[Sun May 12 06:53:26 2013] Offset between fit and detection position for source 27 = 0.509131 pixels
[Sun May 12 06:53:26 2013] 554.007800 total counts/ 499.250000 bgd. counts: snr = 2.450682
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.509131 pixels
  Position = (250.1, 349.4) = 20 10 52.74 -56 22 10.1
  Extent = 8.7 (2.2-18.0)", rotation angle = 0
  Source counts = 54.8 +/- 23.5
  Background counts = 499.2
  Rate = 0.0008 +/- 0.0003
[Sun May 12 06:53:26 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:26 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:53:26 2013] Source does appear to be extended
[Sun May 12 06:53:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:43 2013] Initial guess for spatial extent in simple fitting = 8.67"
[Sun May 12 06:53:43 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sun May 12 06:53:43 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.67"
[Sun May 12 06:53:45 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src33.ximg exists
[Sun May 12 06:53:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src33.csv
[Sun May 12 06:53:45 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun May 12 06:53:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src33.csv
[Sun May 12 06:53:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:47 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun May 12 06:53:47 2013] fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun May 12 06:53:47 2013] Fit fullrun_mos2_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sun May 12 06:54:12 2013] Spatial fit model total counts = 561.391000, observed total counts = 535.000000
[Sun May 12 06:54:12 2013] Offset between fit and detection position for source 27 = 0.019337 pixels
[Sun May 12 06:54:12 2013] 556.995100 total counts/ 499.936000 bgd. counts: snr = 2.551924
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.019337 pixels
  Position = (250.1, 349.4) = 20 10 52.74 -56 22 10.2
  Extent = 9.0 (2.2-17.3)", rotation angle = 0
  Source counts = 57.1 +/- 23.6
  Background counts = 499.9
  Rate = 0.0008 +/- 0.0003
[Sun May 12 06:54:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:54:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:54:12 2013] Source does appear to be extended
[Sun May 12 06:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 08:07:15 2013] XMMSAS src. selection expression = ellipse(21708.502140, 30346.019000, 539.956197, 539.956197, 0.000000, X, Y)
[Sun May 12 08:07:15 2013] Writing source region out to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27_src.reg
[Sun May 12 08:07:15 2013] Extracting stamp from image fullrun_mos2_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (219, 318) - (281, 380)
[Sun May 12 08:07:15 2013] XMMSAS bgd. selection expression = annulus(21708.502140, 30346.019000, 899.926995, 1799.853990, X, Y) && !ellipse(21681.761200, 28721.540400, 347.702410, 347.702410, 0.000000, X, Y) && !ellipse(22918.055254, 29356.708142, 453.644013, 453.644013, 0.000000, X, Y)
[Sun May 12 08:07:15 2013] Writing fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27.gif
[Sun May 12 08:18:13 2013] Mean detx,y = (5721.84, 2435.50) 
[Sun May 12 08:18:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 08:18:28 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 08:18:29 2013] Setting source spectrum file to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May 12 08:18:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May 12 08:55:41 2013] Not generating rmf since there are only 57 counts
[Sun May 12 08:55:41 2013] rmf not generated due to insufficient counts
[Sun May 12 09:06:55 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:55 2013] Total counts from fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 292.00
[Sun May 12 09:06:55 2013] Total counts from fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1419.00
[Sun May 12 09:06:55 2013] Got source and background scale factors 844012.000000, 5952045.000000
[Sun May 12 09:06:55 2013] User source parameters:
  Position = (250.1, 349.4) = 20 10 52.74 -56 22 10.2
  Extent = 9.0 (2.2-17.3)", rotation angle = 0
  Source aperture counts = 90.8 +/- 18.1
  Background aperture counts = 201.2
  Rate = 0.001 +/- 0.0003

[Sun May 12 09:06:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:58 2013] Using photon index=1.80, rate=0.000788, arf fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27.arf
[Sun May 12 09:06:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:58 2013] Updating source flux to 1.2e-14
[Sun May 12 09:07:03 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 09:07:09 2013] xmm0653050801/analysis//spectral/fullrun_mos2_xmm0653050801_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete