[Sun May 12 06:52:24 2013] Detection parameters:
  Position = (330.2, 265.0) = 20 10 10.76 -56 28 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.2 +/- 20.8
  Background counts = 97.4
  Rate = 0.002 +/- 0.0003

[Sun May 12 06:52:24 2013] Off-axis axis estimate = 3.34'
[Sun May 12 06:52:56 2013] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:52:56 2013] Initial guess for spatial extent in simple fitting = 8.10"
[Sun May 12 06:52:56 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.896
[Sun May 12 06:52:56 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.10"
[Sun May 12 06:52:56 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 12 06:52:56 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 12 06:52:56 2013] Fit fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_src11 appears to have run properly
[Sun May 12 06:52:57 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 12 06:52:57 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 12 06:52:57 2013] Fit fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 12 06:53:18 2013] Spatial fit model total counts = 570.000000, observed total counts = 570.000000
[Sun May 12 06:53:18 2013] Offset between fit and detection position for source 27 = 0.228228 pixels
[Sun May 12 06:53:18 2013] 569.393300 total counts/ 488.280000 bgd. counts: snr = 3.670774
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.228228 pixels
  Position = (330.4, 265.1) = 20 10 10.66 -56 28 16.9
  Extent = 4.5 (3.3-5.8)", rotation angle = 0
  Source counts = 81.1 +/- 23.9
  Background counts = 488.3
  Rate = 0.001 +/- 0.0003
[Sun May 12 06:53:18 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:53:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:53:18 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:53:18 2013] Source does appear to be extended
[Sun May 12 06:53:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 06:53:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 06:53:42 2013] Initial guess for spatial extent in simple fitting = 4.47"
[Sun May 12 06:53:42 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.964
[Sun May 12 06:53:42 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 4.47"
[Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 12 06:53:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src11.csv
[Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 12 06:53:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src11.csv
[Sun May 12 06:53:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 12 06:53:43 2013] Fit fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May 12 06:54:04 2013] Spatial fit model total counts = 569.998000, observed total counts = 570.000000
[Sun May 12 06:54:04 2013] Offset between fit and detection position for source 27 = 0.001664 pixels
[Sun May 12 06:54:04 2013] 569.391400 total counts/ 487.796000 bgd. counts: snr = 3.694422
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.001664 pixels
  Position = (330.4, 265.1) = 20 10 10.66 -56 28 16.9
  Extent = 4.5 (3.3-5.8)", rotation angle = 0
  Source counts = 81.6 +/- 23.9
  Background counts = 487.8
  Rate = 0.001 +/- 0.0003
[Sun May 12 06:54:05 2013] Vigneting correction estimate = 1.000000
[Sun May 12 06:54:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 06:54:05 2013] Assessing source extent using major axis lower bound
[Sun May 12 06:54:05 2013] Source does appear to be extended
[Sun May 12 06:54:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 07:39:21 2013] XMMSAS src. selection expression = ellipse(28692.498800, 23014.243200, 270.630608, 270.630608, 0.000000, X, Y)
[Sun May 12 07:39:21 2013] Writing source region out to fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27_src.reg
[Sun May 12 07:39:21 2013] Extracting stamp from image fullrun_mos1_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (315, 250) - (346, 281)
[Sun May 12 07:39:21 2013] XMMSAS bgd. selection expression = annulus(28692.498800, 23014.243200, 451.051013, 902.102026, X, Y)
[Sun May 12 07:39:21 2013] Writing fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27.gif
[Sun May 12 07:45:23 2013] Mean detx,y = (-4097.62, 1614.46) 
[Sun May 12 07:45:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 07:45:31 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 07:45:31 2013] Setting source spectrum file to fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May 12 07:45:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May 12 07:58:35 2013] Not generating rmf since there are only 81 counts
[Sun May 12 07:58:35 2013] rmf not generated due to insufficient counts
[Sun May 12 09:06:47 2013] Updating aperture counts using extracted products
[Sun May 12 09:06:47 2013] Total counts from fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 143.00
[Sun May 12 09:06:47 2013] Total counts from fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27_bgd.pi.gz = 474.00
[Sun May 12 09:06:47 2013] Got source and background scale factors 230400.000000, 1907980.000000
[Sun May 12 09:06:47 2013] User source parameters:
  Position = (330.4, 265.1) = 20 10 10.66 -56 28 16.9
  Extent = 4.5 (3.3-5.8)", rotation angle = 0
  Source aperture counts = 85.8 +/- 13.0
  Background aperture counts = 57.2
  Rate = 0.001 +/- 0.0002

[Sun May 12 09:06:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 09:06:50 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27.arf
[Sun May 12 09:06:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 09:06:50 2013] Updating source flux to 1.9e-14
[Sun May 12 09:07:00 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 09:07:03 2013] xmm0653050801/analysis//spectral/fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete