[Sun May 12 06:52:24 2013] Detection parameters: Position = (218.1, 283.1) = 20 11 9.58 -56 26 57.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 99.1 +/- 17.8 Background counts = 87.7 Rate = 0.002 +/- 0.0004 [Sun May 12 06:52:24 2013] Off-axis axis estimate = 5.93' [Sun May 12 06:52:56 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting [Sun May 12 06:52:56 2013] Initial guess for spatial extent in simple fitting = 9.39" [Sun May 12 06:52:56 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.273 [Sun May 12 06:52:56 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.39" [Sun May 12 06:52:56 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_src13.ximg exists [Sun May 12 06:52:56 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_src13_1.ximg exists [Sun May 12 06:52:56 2013] Fit fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_src13 appears to have run properly [Sun May 12 06:52:57 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Sun May 12 06:52:57 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Sun May 12 06:52:57 2013] Fit fullrun_mos1_xmm0653050801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Sun May 12 06:53:18 2013] Spatial fit model total counts = 482.961000, observed total counts = 483.000000 [Sun May 12 06:53:18 2013] Offset between fit and detection position for source 26 = 0.147488 pixels [Sun May 12 06:53:18 2013] 480.367400 total counts/ 398.452000 bgd. counts: snr = 4.103718 Spatial fit parameters: Offset between fit and detection position for source 26 = 0.147488 pixels Position = (218.2, 283.2) = 20 11 9.52 -56 26 57.6 Extent = 8.2 (5.2-12.2)" x 5.2 (3.3-7.6)", rotation angle = 82 (75-79) degrees Source counts = 81.9 +/- 21.9 Background counts = 398.5 Rate = 0.001 +/- 0.0003 [Sun May 12 06:53:18 2013] Vigneting correction estimate = 1.000000 [Sun May 12 06:53:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 12 06:53:18 2013] Assessing source extent using major axis lower bound [Sun May 12 06:53:18 2013] Source does appear to be extended [Sun May 12 06:53:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.69 [Sun May 12 06:53:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 12 06:53:42 2013] Initial guess for spatial extent in simple fitting = 6.70" [Sun May 12 06:53:42 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.962 [Sun May 12 06:53:42 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 6.70" [Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src13.ximg exists [Sun May 12 06:53:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src13.csv [Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src13_1.ximg exists [Sun May 12 06:53:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src13.csv [Sun May 12 06:53:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Sun May 12 06:53:43 2013] fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Sun May 12 06:53:43 2013] Fit fullrun_mos1_xmm0653050801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Sun May 12 06:54:04 2013] Spatial fit model total counts = 482.994000, observed total counts = 483.000000 [Sun May 12 06:54:04 2013] Offset between fit and detection position for source 26 = 0.086219 pixels [Sun May 12 06:54:04 2013] 480.509000 total counts/ 408.187000 bgd. counts: snr = 3.579652 Spatial fit parameters: Offset between fit and detection position for source 26 = 0.086219 pixels Position = (218.1, 283.3) = 20 11 9.56 -56 26 57.4 Extent = 6.0 (4.3-8.6)", rotation angle = 0 Source counts = 72.3 +/- 21.9 Background counts = 408.2 Rate = 0.001 +/- 0.0003 [Sun May 12 06:54:05 2013] Vigneting correction estimate = 1.000000 [Sun May 12 06:54:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 12 06:54:05 2013] Assessing source extent using major axis lower bound [Sun May 12 06:54:05 2013] Source does appear to be extended [Sun May 12 06:54:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 12 07:39:21 2013] XMMSAS src. selection expression = ellipse(18928.718840, 24595.975200, 357.543610, 357.543610, 0.000000, X, Y) [Sun May 12 07:39:21 2013] Writing source region out to fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26_src.reg [Sun May 12 07:39:21 2013] Extracting stamp from image fullrun_mos1_xmm0653050801_pi300-10000_cl_sm2.00.img.gz, (198, 263) - (239, 304) [Sun May 12 07:39:21 2013] XMMSAS bgd. selection expression = annulus(18928.718840, 24595.975200, 595.906017, 1191.812034, X, Y) [Sun May 12 07:39:21 2013] Writing fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26.gif [Sun May 12 07:45:48 2013] Mean detx,y = (-3258.06, -8224.61) [Sun May 12 07:45:49 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 12 07:45:54 2013] Binned source spectrum to 10 counts/bin [Sun May 12 07:45:54 2013] Setting source spectrum file to fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Sun May 12 07:45:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26_bgd.pi.gz [Sun May 12 08:01:59 2013] Not generating rmf since there are only 72 counts [Sun May 12 08:01:59 2013] rmf not generated due to insufficient counts [Sun May 12 09:06:47 2013] Updating aperture counts using extracted products [Sun May 12 09:06:47 2013] Total counts from fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 161.00 [Sun May 12 09:06:47 2013] Total counts from fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26_bgd.pi.gz = 723.00 [Sun May 12 09:06:47 2013] Got source and background scale factors 400000.000000, 3363200.000000 [Sun May 12 09:06:47 2013] User source parameters: Position = (218.1, 283.3) = 20 11 9.56 -56 26 57.4 Extent = 6.0 (4.3-8.6)", rotation angle = 0 Source aperture counts = 75.0 +/- 13.7 Background aperture counts = 86.0 Rate = 0.001 +/- 0.0002 [Sun May 12 09:06:50 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 12 09:06:50 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26.arf [Sun May 12 09:06:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 12 09:06:50 2013] Updating source flux to 2.1e-14 [Sun May 12 09:07:00 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 12 09:07:03 2013] xmm0653050801/analysis//spectral/fullrun_mos1_xmm0653050801_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete