[Fri Jun  1 20:12:40 2012] Detection parameters:
  Position = (359.0, 306.0) = 20 9 58.31 -56 24 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.9 +/- 9.8
  Background counts = 9.3
  Rate = 0.003 +/- 0.0005

[Fri Jun  1 20:12:41 2012] Off-axis axis estimate = 4.42'
[Fri Jun  1 21:18:12 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:18:12 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Fri Jun  1 21:18:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Fri Jun  1 21:18:12 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.64"
[Fri Jun  1 21:46:43 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun  1 21:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_src13.csv
[Fri Jun  1 21:46:43 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun  1 21:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_src13.csv
[Fri Jun  1 21:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:46:43 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun  1 21:46:43 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun  1 21:46:43 2012] Fit fullrun_mos2_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun  1 21:46:56 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.966492 pixels away
[Fri Jun  1 21:46:56 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:46:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:46:56 2012] Assessing source extent using major
[Fri Jun  1 21:46:56 2012] Source does appear to be extended
[Fri Jun  1 21:46:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 22:51:52 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 22:51:52 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Fri Jun  1 22:51:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Fri Jun  1 22:51:52 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.64"
[Fri Jun  1 23:17:51 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun  1 23:17:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_src13.csv
[Fri Jun  1 23:17:51 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun  1 23:17:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_src13.csv
[Fri Jun  1 23:17:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 23:17:51 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun  1 23:17:51 2012] fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun  1 23:17:51 2012] Fit fullrun_mos2_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun  1 23:18:05 2012] Spatial fit model total counts = 145.750000, observed total counts = 146.000000
[Fri Jun  1 23:18:05 2012] Offset between fit and detection position for source 15 = 0.270875 pixels
[Fri Jun  1 23:18:05 2012] 144.135300 total counts/ 112.525000 bgd. counts: snr = 2.979917
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.270875 pixels
  Position = (358.9, 306.3) = 20 9 58.36 -56 24 48.5
  Extent = 4.1 (3.1-6.6)", rotation angle = 0
  Source counts = 31.6 +/- 12.0
  Background counts = 112.5
  Rate = 0.001 +/- 0.0005
[Fri Jun  1 23:18:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 23:18:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 23:18:05 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 23:18:05 2012] Source does appear to be extended
[Fri Jun  1 23:18:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 00:00:45 2012] XMMSAS src. selection expression = ellipse(31172.389680, 26597.807800, 247.225807, 247.225807, 0.000000, X, Y)
[Sat Jun  2 00:00:45 2012] Writing source region out to fullrun_mos2_xmm0653050601_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun  2 00:00:45 2012] Extracting stamp from image fullrun_mos2_xmm0653050601_pi300-10000_cl_sm2.00.img.gz, (345, 292) - (373, 320)
[Sat Jun  2 00:00:45 2012] XMMSAS bgd. selection expression = annulus(31172.389680, 26597.807800, 412.043012, 824.086024, X, Y)
[Sat Jun  2 00:00:45 2012] Writing fullrun_mos2_xmm0653050601_pi300-10000_pass1_cl_src15.gif
[Sat Jun  2 00:04:26 2012] Mean detx,y = (-3264.20, 1247.78) 
[Sat Jun  2 00:04:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 00:04:34 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 00:04:34 2012] Setting source spectrum file to fullrun_mos2_xmm0653050601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun  2 00:04:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0653050601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun  2 00:14:39 2012] Not generating rmf since there are only 31 counts
[Sat Jun  2 00:14:39 2012] rmf not generated due to insufficient counts
[Sat Jun  2 00:15:45 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:15:45 2012] Error reading totcts from fullrun_mos2_xmm0653050601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun  2 00:15:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:15:45 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0653050601_pi300-10000_pass1_cl_src15.arf
[Sat Jun  2 00:15:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:15:45 2012] Updating source flux to 2.4e-14
[Sat Jun  2 00:15:53 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting