[Fri Jun  1 20:12:21 2012] Detection parameters:
  Position = (304.0, 402.8) = 20 10 27.14 -56 17 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.1 +/- 11.4
  Background counts = 8.3
  Rate = 0.006 +/- 0.0009

[Fri Jun  1 20:12:22 2012] Off-axis axis estimate = 7.58'
[Fri Jun  1 20:51:09 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 20:51:09 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Fri Jun  1 20:51:09 2012] source mask rpix=2.3, npix_max = 32, mask sum = 34, frac = 1.047
[Fri Jun  1 20:51:09 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.22"
[Fri Jun  1 21:18:11 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  1 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src4.csv
[Fri Jun  1 21:18:11 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  1 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src4.csv
[Fri Jun  1 21:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:18:12 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  1 21:18:12 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  1 21:18:12 2012] Fit fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun  1 21:46:53 2012] Spatial fit model total counts = 161.181000, observed total counts = 152.000000
[Fri Jun  1 21:46:53 2012] Offset between fit and detection position for source 4 = 0.234615 pixels
[Fri Jun  1 21:46:53 2012] 162.558000 total counts/ 107.483000 bgd. counts: snr = 5.312325
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.234615 pixels
  Position = (303.8, 402.7) = 20 10 27.25 -56 17 49.4
  Extent = 5.5 (4.2-7.3)", rotation angle = 0
  Source counts = 55.1 +/- 12.7
  Background counts = 107.5
  Rate = 0.003 +/- 0.0006
[Fri Jun  1 21:46:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:46:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:46:53 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:46:53 2012] Source does appear to be extended
[Fri Jun  1 21:46:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 22:26:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 22:26:43 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Fri Jun  1 22:26:43 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.953
[Fri Jun  1 22:26:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.54"
[Fri Jun  1 22:51:51 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  1 22:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 22:51:51 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  1 22:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 22:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 22:51:52 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  1 22:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun  1 22:51:52 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  1 22:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun  1 22:51:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 23:18:01 2012] Warning, spatial fit 4 centroid is now closest to src. 16
[Fri Jun  1 23:18:01 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 23:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 23:18:01 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 23:18:01 2012] Source does appear to be extended
[Fri Jun  1 23:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 23:50:33 2012] XMMSAS src. selection expression = ellipse(26379.374400, 34985.646800, 332.645410, 332.645410, 0.000000, X, Y)
[Fri Jun  1 23:50:33 2012] Writing source region out to fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  1 23:50:33 2012] Extracting stamp from image fullrun_mos1_xmm0653050601_pi300-10000_cl_sm2.00.img.gz, (285, 384) - (323, 422)
[Fri Jun  1 23:50:33 2012] XMMSAS bgd. selection expression = annulus(26379.374400, 34985.646800, 554.409016, 1108.818032, X, Y)
[Fri Jun  1 23:50:33 2012] Writing fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src4.gif
[Fri Jun  1 23:51:32 2012] Mean detx,y = (6984.27, -4829.07) 
[Fri Jun  1 23:51:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 23:51:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 23:51:46 2012] Setting source spectrum file to fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 23:51:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  1 23:59:22 2012] Not generating rmf since there are only 55 counts
[Fri Jun  1 23:59:22 2012] rmf not generated due to insufficient counts
[Sat Jun  2 00:15:44 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:15:44 2012] Error reading totcts from fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun  2 00:15:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:15:45 2012] Using photon index=1.80, rate=0.00251, arf fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src4.arf
[Sat Jun  2 00:15:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:15:45 2012] Updating source flux to 5.1e-14
[Sat Jun  2 00:15:46 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting