[Fri Jun  1 20:12:21 2012] Detection parameters:
  Position = (374.9, 311.8) = 20 9 49.96 -56 24 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.7 +/- 24.7
  Background counts = 9.8
  Rate = 0.02 +/- 0.001

[Fri Jun  1 20:12:22 2012] Off-axis axis estimate = 5.63'
[Fri Jun  1 20:51:09 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 20:51:09 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Fri Jun  1 20:51:09 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.089
[Fri Jun  1 20:51:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.24"
[Fri Jun  1 21:18:11 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 21:18:11 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 21:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 21:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:18:12 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 21:18:12 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 21:18:12 2012] Fit fullrun_mos1_xmm0653050601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 21:46:53 2012] Spatial fit model total counts = 482.778000, observed total counts = 475.000000
[Fri Jun  1 21:46:53 2012] Offset between fit and detection position for source 2 = 0.177178 pixels
[Fri Jun  1 21:46:53 2012] 479.920000 total counts/ 182.945000 bgd. counts: snr = 21.956323
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.177178 pixels
  Position = (374.7, 311.7) = 20 9 50.04 -56 24 24.8
  Extent = 5.2 (4.6-5.8)", rotation angle = 0
  Source counts = 297.0 +/- 21.9
  Background counts = 182.9
  Rate = 0.01 +/- 0.001
[Fri Jun  1 21:46:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:46:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:46:53 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:46:53 2012] Source does appear to be extended
[Fri Jun  1 21:46:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 22:26:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 22:26:43 2012] Initial guess for spatial extent in simple fitting = 5.21"
[Fri Jun  1 22:26:43 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.781
[Fri Jun  1 22:26:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.21"
[Fri Jun  1 22:51:51 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 22:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 22:51:51 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 22:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 22:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 22:51:52 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 22:51:52 2012] fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 22:51:52 2012] Fit fullrun_mos1_xmm0653050601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 23:18:01 2012] Spatial fit model total counts = 469.853000, observed total counts = 461.000000
[Fri Jun  1 23:18:01 2012] Offset between fit and detection position for source 2 = 0.008411 pixels
[Fri Jun  1 23:18:01 2012] 469.423000 total counts/ 174.848000 bgd. counts: snr = 22.277454
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008411 pixels
  Position = (374.7, 311.7) = 20 9 50.04 -56 24 24.9
  Extent = 5.1 (4.5-5.7)", rotation angle = 0
  Source counts = 294.6 +/- 21.7
  Background counts = 174.8
  Rate = 0.01 +/- 0.001
[Fri Jun  1 23:18:01 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 23:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 23:18:01 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 23:18:01 2012] Source does appear to be extended
[Fri Jun  1 23:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 23:50:33 2012] XMMSAS src. selection expression = ellipse(32554.603200, 27068.319000, 308.004009, 308.004009, 0.000000, X, Y)
[Fri Jun  1 23:50:33 2012] Writing source region out to fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 23:50:33 2012] Extracting stamp from image fullrun_mos1_xmm0653050601_pi300-10000_cl_sm2.00.img.gz, (357, 294) - (392, 329)
[Fri Jun  1 23:50:33 2012] XMMSAS bgd. selection expression = annulus(32554.603200, 27068.319000, 513.340015, 1026.680030, X, Y)
[Fri Jun  1 23:50:33 2012] Writing fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 23:50:35 2012] Mean detx,y = (2474.56, 4142.74) 
[Fri Jun  1 23:50:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 23:50:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 23:50:42 2012] Setting source spectrum file to fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 23:50:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  2 00:15:44 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:15:44 2012] Error reading totcts from fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  2 00:15:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:15:44 2012] Using photon index=1.80, rate=0.0134, arf fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2.arf
[Sat Jun  2 00:15:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:15:44 2012] Updating source flux to 1.9e-13
[Sat Jun  2 00:15:52 2012] Reading fit data from xmm0653050601/analysis//spectral/fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jun  2 00:15:52 2012] Spectral fit parameter nH value = 5.83546e+20
[Sat Jun  2 00:15:52 2012] Spectral fit parameter PhoIndex value = 2.27476
[Sat Jun  2 00:15:52 2012] Failed to get F(0.3-8.0) from xmm0653050601/analysis//spectral/fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 00:15:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:15:52 2012] Using Nh = 5.8e+20, photon index=2.27, rate=0.0134, arf fullrun_mos1_xmm0653050601_pi300-10000_pass1_cl_src2.arf
[Sat Jun  2 00:15:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:15:53 2012] Updating source flux to 1.7e-13