[Tue May 14 07:55:13 2013] Detection parameters:
  Position = (458.1, 397.9) = 20 8 54.53 -56 17 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.7 +/- 13.5
  Background counts = 45.8
  Rate = 0.0007 +/- 0.0002

[Tue May 14 07:55:14 2013] Off-axis axis estimate = 13.64'
[Tue May 14 09:55:35 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Tue May 14 09:55:35 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Tue May 14 09:55:35 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Tue May 14 09:55:35 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 13.25"
[Tue May 14 10:53:25 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_src38.ximg exists
[Tue May 14 10:53:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_src38.csv
[Tue May 14 10:53:25 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue May 14 10:53:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_src38.csv
[Tue May 14 10:53:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 10:53:25 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue May 14 10:53:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue May 14 10:53:25 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue May 14 10:53:25 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue May 14 10:53:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050401_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 11:51:26 2013] Spatial fit model total counts = 815.146000, observed total counts = 728.000000
[Tue May 14 11:51:26 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 11:51:26 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 17.436559 pixels away
[Tue May 14 11:51:26 2013] Vigneting correction estimate = 1.000000
[Tue May 14 11:51:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 11:51:26 2013] Assessing source extent using major
[Tue May 14 11:51:26 2013] Source does appear to be extended
[Tue May 14 11:51:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 11:51:26 2013] Source is confused with source 22
[Tue May 14 13:59:22 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Tue May 14 13:59:22 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Tue May 14 13:59:22 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Tue May 14 13:59:22 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 13.25"
[Tue May 14 14:47:22 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_src38.ximg exists
[Tue May 14 14:47:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_src38.csv
[Tue May 14 14:47:22 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_src38_1.ximg exists
[Tue May 14 14:47:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_src38.csv
[Tue May 14 14:47:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 14:47:23 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Tue May 14 14:47:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Tue May 14 14:47:23 2013] fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Tue May 14 14:47:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Tue May 14 14:47:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0653050401_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 15:44:10 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.017936 pixels away
[Tue May 14 15:44:10 2013] Warning, spatial fit 38 centroid is now closest to src. 22
[Tue May 14 15:44:10 2013] Vigneting correction estimate = 1.000000
[Tue May 14 15:44:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 15:44:10 2013] Assessing source extent using major
[Tue May 14 15:44:10 2013] Source does appear to be extended
[Tue May 14 15:44:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 18:43:43 2013] XMMSAS src. selection expression = ellipse(39809.699860, 34565.767426, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 18:43:43 2013] Writing source region out to fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20_src.reg
[Tue May 14 18:43:43 2013] Extracting stamp from image fullrun_mos1_xmm0653050401_pi300-10000_cl_sm2.00.img.gz, (421, 360) - (496, 435)
[Tue May 14 18:43:43 2013] XMMSAS bgd. selection expression = annulus(39809.699860, 34565.767426, 1087.500000, 2175.000000, X, Y) && !ellipse(39643.805664, 34135.060608, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 18:43:43 2013] Writing fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20.gif
[Tue May 14 18:57:05 2013] Mean detx,y = (12608.68, 7011.51) 
[Tue May 14 18:57:06 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 18:57:33 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 18:57:34 2013] Setting source spectrum file to fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue May 14 18:57:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue May 14 19:12:35 2013] Not generating rmf since there are only 57 counts
[Tue May 14 19:12:35 2013] rmf not generated due to insufficient counts
[Tue May 14 20:01:54 2013] Updating aperture counts using extracted products
[Tue May 14 20:01:54 2013] Total counts from fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 419.00
[Tue May 14 20:01:54 2013] Total counts from fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1744.00
[Tue May 14 20:01:54 2013] Got source and background scale factors 1030364.000000, 7296161.000000
[Tue May 14 20:01:54 2013] User source parameters:
  Position = (458.1, 397.9) = 20 8 54.53 -56 17 35.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 172.7 +/- 21.5
  Background aperture counts = 246.3
  Rate = 0.002 +/- 0.0003

[Tue May 14 20:01:54 2013] Updating counts from extracted products
[Tue May 14 20:01:54 2013] Set source signif. to 172.71/15.69 = 11.01
[Tue May 14 20:01:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 20:01:55 2013] Using photon index=1.80, rate=0.00201, arf fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20.arf
[Tue May 14 20:01:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 20:01:55 2013] Updating source flux to 4.9e-14
[Tue May 14 20:02:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 20:02:06 2013] xmm0653050401/analysis//spectral/fullrun_mos1_xmm0653050401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete