[Thu May 23 12:19:16 2013] Detection parameters:
  Position = (363.1, 150.6) = 2 16 53.14 -52 56 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.8 +/- 9.1
  Background counts = 11.2
  Rate = 0.002 +/- 0.0004

[Thu May 23 12:19:16 2013] Off-axis axis estimate = 11.70'
[Thu May 23 12:19:35 2013] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Thu May 23 12:19:35 2013] Initial guess for spatial extent in simple fitting = 12.28"
[Thu May 23 12:19:35 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.951
[Thu May 23 12:19:35 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.28"
[Thu May 23 12:19:35 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass0_src27.ximg exists
[Thu May 23 12:19:35 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May 23 12:19:35 2013] Fit fullrun_mos2_xmm0652951401_pi300-10000_cl_pass0_src27 appears to have run properly
[Thu May 23 12:19:36 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May 23 12:19:36 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May 23 12:19:36 2013] Fit fullrun_mos2_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu May 23 12:19:50 2013] Spatial fit model total counts = 144.737000, observed total counts = 144.000000
[Thu May 23 12:19:50 2013] Offset between fit and detection position for source 15 = 1.062051 pixels
[Thu May 23 12:19:50 2013] 141.101500 total counts/ 94.624700 bgd. counts: snr = 4.777866
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.062051 pixels
  Position = (362.1, 150.4) = 2 16 53.64 -52 56 45.3
  Extent = 14.4 (13.7-14.8)" x 4.9 (3.0-8.2)", rotation angle = 340 (326-0) degrees
  Source counts = 46.5 +/- 11.9
  Background counts = 94.6
  Rate = 0.002 +/- 0.0005
[Thu May 23 12:19:50 2013] Vigneting correction estimate = 1.000000
[Thu May 23 12:19:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 12:19:50 2013] Assessing source extent using major axis lower bound
[Thu May 23 12:19:50 2013] Source does appear to be extended
[Thu May 23 12:19:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68
[Thu May 23 12:19:50 2013] Source is asymmetric
[Thu May 23 12:20:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 12:20:01 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Thu May 23 12:20:01 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Thu May 23 12:20:01 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 9.66"
[Thu May 23 12:20:02 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_src24.ximg exists
[Thu May 23 12:20:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_src24.csv
[Thu May 23 12:20:02 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu May 23 12:20:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_src24.csv
[Thu May 23 12:20:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:20:02 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu May 23 12:20:02 2013] fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu May 23 12:20:02 2013] Fit fullrun_mos2_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu May 23 12:20:14 2013] Spatial fit model total counts = 130.000000, observed total counts = 130.000000
[Thu May 23 12:20:14 2013] Offset between fit and detection position for source 15 = 1.133738 pixels
[Thu May 23 12:20:14 2013] 129.107900 total counts/ 100.491000 bgd. counts: snr = 2.854690
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.133738 pixels
  Position = (363.1, 150.8) = 2 16 53.13 -52 56 43.7
  Extent = 5.2 (3.6-10.1)", rotation angle = 0
  Source counts = 28.6 +/- 11.4
  Background counts = 100.5
  Rate = 0.001 +/- 0.0005
[Thu May 23 12:20:14 2013] Vigneting correction estimate = 1.000000
[Thu May 23 12:20:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 12:20:14 2013] Assessing source extent using major axis lower bound
[Thu May 23 12:20:14 2013] Source does appear to be extended
[Thu May 23 12:20:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 12:33:59 2013] XMMSAS src. selection expression = ellipse(31545.111800, 13069.728520, 311.460009, 311.460009, 0.000000, X, Y)
[Thu May 23 12:33:59 2013] Writing source region out to fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15_src.reg
[Thu May 23 12:33:59 2013] Extracting stamp from image fullrun_mos2_xmm0652951401_pi300-10000_cl_sm2.00.img.gz, (345, 133) - (381, 169)
[Thu May 23 12:33:59 2013] XMMSAS bgd. selection expression = annulus(31545.111800, 13069.728520, 519.100015, 1038.200030, X, Y)
[Thu May 23 12:33:59 2013] Writing fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15.gif
[Thu May 23 12:40:05 2013] Mean detx,y = (-11062.89, -8465.75) 
[Thu May 23 12:40:05 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 12:40:13 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 12:40:13 2013] Setting source spectrum file to fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 23 12:40:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu May 23 13:00:50 2013] Not generating rmf since there are only 28 counts
[Thu May 23 13:00:50 2013] rmf not generated due to insufficient counts
[Thu May 23 13:01:30 2013] Updating aperture counts using extracted products
[Thu May 23 13:01:30 2013] Total counts from fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 44.00
[Thu May 23 13:01:30 2013] Total counts from fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15_bgd.pi.gz = 138.00
[Thu May 23 13:01:30 2013] Got source and background scale factors 305600.000000, 2537600.000000
[Thu May 23 13:01:30 2013] User source parameters:
  Position = (363.1, 150.8) = 2 16 53.13 -52 56 43.7
  Extent = 5.2 (3.6-10.1)", rotation angle = 0
  Source aperture counts = 27.4 +/- 7.7
  Background aperture counts = 16.6
  Rate = 0.001 +/- 0.0004

[Thu May 23 13:01:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 13:01:31 2013] Using photon index=1.80, rate=0.00132, arf fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15.arf
[Thu May 23 13:01:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 13:01:31 2013] Updating source flux to 3.9e-14
[Thu May 23 13:01:35 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 13:01:39 2013] xmm0652951401/analysis//spectral/fullrun_mos2_xmm0652951401_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete