[Thu May 23 12:19:15 2013] Detection parameters:
  Position = (511.8, 300.2) = 2 15 42.02 -52 45 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.8 +/- 10.2
  Background counts = 12.8
  Rate = 0.002 +/- 0.0005

[Thu May 23 12:19:15 2013] Off-axis axis estimate = 15.47'
[Thu May 23 12:19:33 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Thu May 23 12:19:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 12:19:33 2013] Initial guess for spatial extent in simple fitting = 14.16"
[Thu May 23 12:19:33 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.134
[Thu May 23 12:19:33 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 14.16"
[Thu May 23 12:19:34 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_src17.ximg exists
[Thu May 23 12:19:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_src17.csv
[Thu May 23 12:19:34 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu May 23 12:19:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_src17.csv
[Thu May 23 12:19:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:19:34 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu May 23 12:19:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May 23 12:19:34 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu May 23 12:19:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu May 23 12:19:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652951401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:19:45 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.980950 pixels away
[Thu May 23 12:19:45 2013] Vigneting correction estimate = 1.000000
[Thu May 23 12:19:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 12:19:45 2013] Assessing source extent using major
[Thu May 23 12:19:45 2013] Source does appear to be extended
[Thu May 23 12:19:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 12:20:00 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Thu May 23 12:20:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 12:20:00 2013] Initial guess for spatial extent in simple fitting = 14.16"
[Thu May 23 12:20:00 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.134
[Thu May 23 12:20:00 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 14.16"
[Thu May 23 12:20:01 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_src17.ximg exists
[Thu May 23 12:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_src17.csv
[Thu May 23 12:20:01 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May 23 12:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_src17.csv
[Thu May 23 12:20:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:20:01 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May 23 12:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May 23 12:20:01 2013] fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May 23 12:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May 23 12:20:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652951401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:20:10 2013] Spatial fit model total counts = 268.551000, observed total counts = 235.000000
[Thu May 23 12:20:10 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 12:20:10 2013] Vigneting correction estimate = 1.000000
[Thu May 23 12:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 12:20:10 2013] Assessing source extent using major
[Thu May 23 12:20:10 2013] Source does appear to be extended
[Thu May 23 12:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 12:21:13 2013] XMMSAS src. selection expression = ellipse(44476.699738, 26068.385986, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 12:21:13 2013] Writing source region out to fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13_src.reg
[Thu May 23 12:21:13 2013] Extracting stamp from image fullrun_mos1_xmm0652951401_pi300-10000_cl_sm2.00.img.gz, (474, 263) - (549, 338)
[Thu May 23 12:21:13 2013] XMMSAS bgd. selection expression = annulus(44476.699738, 26068.385986, 1087.500000, 2175.000000, X, Y)
[Thu May 23 12:21:13 2013] Writing fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13.gif
[Thu May 23 12:24:14 2013] Mean detx,y = (9830.72, 13338.48) 
[Thu May 23 12:24:15 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 12:24:32 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 12:24:32 2013] Setting source spectrum file to fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu May 23 12:24:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu May 23 12:33:31 2013] Not generating rmf since there are only 45 counts
[Thu May 23 12:33:31 2013] rmf not generated due to insufficient counts
[Thu May 23 13:01:26 2013] Updating aperture counts using extracted products
[Thu May 23 13:01:26 2013] Total counts from fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 135.00
[Thu May 23 13:01:26 2013] Total counts from fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 547.00
[Thu May 23 13:01:26 2013] Got source and background scale factors 1219304.000000, 6375411.000000
[Thu May 23 13:01:26 2013] User source parameters:
  Position = (511.8, 300.2) = 2 15 42.02 -52 45 51.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 30.4 +/- 12.7
  Background aperture counts = 104.6
  Rate = 0.001 +/- 0.0006

[Thu May 23 13:01:26 2013] Updating counts from extracted products
[Thu May 23 13:01:26 2013] Set source signif. to 30.39/10.23 = 2.97
[Thu May 23 13:01:27 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 13:01:27 2013] Using photon index=1.80, rate=0.00141, arf fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13.arf
[Thu May 23 13:01:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 13:01:27 2013] Updating source flux to 3.6e-14
[Thu May 23 13:01:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 13:01:35 2013] xmm0652951401/analysis//spectral/fullrun_mos1_xmm0652951401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete