[Fri May  4 05:49:27 2012] Detection parameters:
  Position = (300.5, 237.7) = 22 14 32.23 29 57 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1297.7 +/- 45.3
  Background counts = 94.7
  Rate = 0.02 +/- 0.0006

[Fri May  4 05:49:29 2012] Off-axis axis estimate = 4.40'
[Fri May  4 06:46:17 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri May  4 06:46:17 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Fri May  4 06:46:17 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.013
[Fri May  4 06:46:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.63"
[Fri May  4 07:53:19 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May  4 07:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_src1.csv
[Fri May  4 07:53:19 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May  4 07:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_src1.csv
[Fri May  4 07:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 07:53:20 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May  4 07:53:20 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  4 07:53:20 2012] Fit fullrun_mos2_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May  4 07:53:36 2012] Spatial fit model total counts = 1520.340000, observed total counts = 1513.000000
[Fri May  4 07:53:36 2012] Offset between fit and detection position for source 4 = 0.113802 pixels
[Fri May  4 07:53:36 2012] 1525.779000 total counts/ 702.267000 bgd. counts: snr = 31.075548
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.113802 pixels
  Position = (300.6, 237.6) = 22 14 32.22 29 57 26.0
  Extent = 4.9 (4.6-5.3)", rotation angle = 0
  Source counts = 823.5 +/- 39.1
  Background counts = 702.3
  Rate = 0.01 +/- 0.0005
[Fri May  4 07:53:36 2012] Vigneting correction estimate = 1.000000
[Fri May  4 07:53:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 07:53:36 2012] Assessing source extent using major axis lower bound
[Fri May  4 07:53:36 2012] Source does appear to be extended
[Fri May  4 07:53:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 08:31:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 08:31:22 2012] Initial guess for spatial extent in simple fitting = 4.95"
[Fri May  4 08:31:22 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.839
[Fri May  4 08:31:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.95"
[Fri May  4 09:41:49 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May  4 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_src1.csv
[Fri May  4 09:41:49 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May  4 09:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_src1.csv
[Fri May  4 09:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 09:41:50 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May  4 09:41:50 2012] fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  4 09:41:50 2012] Fit fullrun_mos2_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May  4 09:42:07 2012] Spatial fit model total counts = 1531.890000, observed total counts = 1532.000000
[Fri May  4 09:42:07 2012] Offset between fit and detection position for source 4 = 0.010944 pixels
[Fri May  4 09:42:07 2012] 1527.727000 total counts/ 707.957000 bgd. counts: snr = 30.809779
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.010944 pixels
  Position = (300.6, 237.6) = 22 14 32.22 29 57 26.1
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 819.8 +/- 39.1
  Background counts = 708.0
  Rate = 0.01 +/- 0.0005
[Fri May  4 09:42:07 2012] Vigneting correction estimate = 1.000000
[Fri May  4 09:42:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 09:42:07 2012] Assessing source extent using major axis lower bound
[Fri May  4 09:42:07 2012] Source does appear to be extended
[Fri May  4 09:42:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 10:35:08 2012] XMMSAS src. selection expression = ellipse(26103.049000, 20624.526000, 295.930209, 295.930209, 0.000000, X, Y)
[Fri May  4 10:35:08 2012] Writing source region out to fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4_src.reg
[Fri May  4 10:35:08 2012] Extracting stamp from image fullrun_mos2_xmm0652730101_pi300-10000_cl_sm2.00.img.gz, (284, 221) - (318, 255)
[Fri May  4 10:35:08 2012] XMMSAS bgd. selection expression = annulus(26103.049000, 20624.526000, 493.217014, 986.434028, X, Y) && !ellipse(26318.971340, 19376.841800, 426.470412, 426.470412, 0.000000, X, Y)
[Fri May  4 10:35:08 2012] Writing fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4.gif
[Fri May  4 10:35:17 2012] Mean detx,y = (2623.79, 3470.41) 
[Fri May  4 10:35:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 10:35:39 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 10:35:40 2012] Setting source spectrum file to fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May  4 10:35:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May  4 11:34:56 2012] Updating aperture counts using extracted products
[Fri May  4 11:34:56 2012] Error reading totcts from fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May  4 11:34:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 11:34:59 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4.arf
[Fri May  4 11:34:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 11:34:59 2012] Updating source flux to 1.6e-13
[Fri May  4 11:37:42 2012] Reading fit data from xmm0652730101/analysis//spectral/fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4_pl.csv
[Fri May  4 11:37:42 2012] Spectral fit parameter nH value = 5.60619e+20
[Fri May  4 11:37:42 2012] Spectral fit parameter PhoIndex value = 1.73864
[Fri May  4 11:37:42 2012] Failed to get F(0.3-8.0) from xmm0652730101/analysis//spectral/fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri May  4 11:37:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 11:37:42 2012] Using Nh = 5.6e+20, photon index=1.74, rate=0.0104, arf fullrun_mos2_xmm0652730101_pi300-10000_pass1_cl_src4.arf
[Fri May  4 11:37:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 11:37:42 2012] Updating source flux to 1.8e-13