[Fri May  4 05:49:25 2012] Detection parameters:
  Position = (210.2, 219.8) = 22 15 2.46 29 56 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 428.9 +/- 28.9
  Background counts = 105.7
  Rate = 0.007 +/- 0.0005

[Fri May  4 05:49:26 2012] Off-axis axis estimate = 8.57'
[Fri May  4 05:52:38 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Fri May  4 05:52:38 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Fri May  4 05:52:38 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Fri May  4 05:52:38 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.71"
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src7.ximg exists
[Fri May  4 06:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src7.csv
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri May  4 06:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src7.csv
[Fri May  4 06:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri May  4 06:46:17 2012] Fit fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri May  4 07:53:27 2012] Spatial fit model total counts = 906.922000, observed total counts = 834.000000
[Fri May  4 07:53:27 2012] Offset between fit and detection position for source 7 = 0.234171 pixels
[Fri May  4 07:53:27 2012] 883.157000 total counts/ 590.422000 bgd. counts: snr = 12.047402
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.234171 pixels
  Position = (210.3, 219.6) = 22 15 2.43 29 56 7.4
  Extent = 6.0 (5.0-6.8)", rotation angle = 0
  Source counts = 292.7 +/- 29.7
  Background counts = 590.4
  Rate = 0.004 +/- 0.0004
[Fri May  4 07:53:27 2012] Vigneting correction estimate = 1.000000
[Fri May  4 07:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 07:53:27 2012] Assessing source extent using major axis lower bound
[Fri May  4 07:53:27 2012] Source does appear to be extended
[Fri May  4 07:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 07:53:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  4 07:53:46 2012] Initial guess for spatial extent in simple fitting = 5.99"
[Fri May  4 07:53:46 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.852
[Fri May  4 07:53:46 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.99"
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src6.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src6.csv
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src6.csv
[Fri May  4 08:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May  4 08:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 09:41:57 2012] Spatial fit model total counts = 926.151000, observed total counts = 820.000000
[Fri May  4 09:41:57 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 09:41:57 2012] Vigneting correction estimate = 1.000000
[Fri May  4 09:41:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 09:41:57 2012] Assessing source extent using major axis lower bound
[Fri May  4 09:41:57 2012] Source does appear to be extended
[Fri May  4 09:41:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 09:42:18 2012] XMMSAS src. selection expression = ellipse(18248.037600, 19056.325800, 359.242210, 359.242210, 0.000000, X, Y)
[Fri May  4 09:42:18 2012] Writing source region out to fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src7_src.reg
[Fri May  4 09:42:18 2012] Extracting stamp from image fullrun_mos1_xmm0652730101_pi300-10000_cl_sm2.00.img.gz, (190, 199) - (231, 240)
[Fri May  4 09:42:18 2012] XMMSAS bgd. selection expression = annulus(18248.037600, 19056.325800, 598.737017, 1197.474034, X, Y) && !ellipse(17281.280540, 19290.901600, 537.189615, 377.952811, 36.453400, X, Y)
[Fri May  4 09:42:18 2012] Writing fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src7.gif
[Fri May  4 09:46:06 2012] Mean detx,y = (7033.79, 4520.80) 
[Fri May  4 09:46:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 09:46:35 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 09:46:35 2012] Setting source spectrum file to fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri May  4 09:46:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri May  4 11:34:53 2012] Updating aperture counts using extracted products
[Fri May  4 11:34:53 2012] Error reading totcts from fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri May  4 11:34:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 11:34:55 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src7.arf
[Fri May  4 11:34:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 11:34:55 2012] Updating source flux to 5.5e-14
[Fri May  4 11:35:02 2012] Flag p found in src. 7 procflags, skipping spectral fitting