[Fri May  4 05:49:24 2012] Detection parameters:
  Position = (92.1, 275.3) = 22 15 42.03 30 0 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.0 +/- 18.2
  Background counts = 54.5
  Rate = 0.001 +/- 0.0002

[Fri May  4 05:49:26 2012] Off-axis axis estimate = 15.05'
[Fri May  4 05:52:38 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Fri May  4 05:52:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 05:52:38 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Fri May  4 05:52:38 2012] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.855
[Fri May  4 05:52:38 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.95"
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src5.ximg exists
[Fri May  4 06:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src5.csv
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May  4 06:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src5.csv
[Fri May  4 06:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May  4 06:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May  4 06:46:17 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May  4 06:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May  4 06:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 07:53:27 2012] Spatial fit model total counts = 446.095000, observed total counts = 379.000000
[Fri May  4 07:53:27 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 07:53:27 2012] Vigneting correction estimate = 1.000000
[Fri May  4 07:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 07:53:27 2012] Assessing source extent using major
[Fri May  4 07:53:27 2012] Source does appear to be extended
[Fri May  4 07:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 07:53:46 2012] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Fri May  4 07:53:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  4 07:53:46 2012] Initial guess for spatial extent in simple fitting = 13.95"
[Fri May  4 07:53:46 2012] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.855
[Fri May  4 07:53:46 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.95"
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src4.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src4.csv
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src4.csv
[Fri May  4 08:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  4 08:31:22 2012] fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May  4 08:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  4 08:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652730101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  4 09:41:57 2012] Spatial fit model total counts = 446.204000, observed total counts = 379.000000
[Fri May  4 09:41:57 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  4 09:41:57 2012] Vigneting correction estimate = 1.000000
[Fri May  4 09:41:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  4 09:41:57 2012] Assessing source extent using major
[Fri May  4 09:41:57 2012] Source does appear to be extended
[Fri May  4 09:41:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  4 09:42:18 2012] XMMSAS src. selection expression = ellipse(7965.060760, 23906.608032, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  4 09:42:18 2012] Writing source region out to fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src5_src.reg
[Fri May  4 09:42:18 2012] Extracting stamp from image fullrun_mos1_xmm0652730101_pi300-10000_cl_sm2.00.img.gz, (55, 238) - (130, 313)
[Fri May  4 09:42:18 2012] XMMSAS bgd. selection expression = annulus(7965.060760, 23906.608032, 1087.500000, 2175.000000, X, Y)
[Fri May  4 09:42:18 2012] Writing fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src5.gif
[Fri May  4 09:44:31 2012] Mean detx,y = (4689.63, 15540.54) 
[Fri May  4 09:44:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 09:45:15 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 09:45:16 2012] Setting source spectrum file to fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May  4 09:45:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May  4 10:16:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 10:16:47 2012] rmf not generated due to insufficient counts
[Fri May  4 11:34:53 2012] Updating aperture counts using extracted products
[Fri May  4 11:34:53 2012] Error reading totcts from fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May  4 11:34:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri May  4 11:34:55 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0652730101_pi300-10000_pass1_cl_src5.arf
[Fri May  4 11:34:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  4 11:34:55 2012] Updating source flux to 4.1e-14
[Fri May  4 11:35:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting