[Mon Jul 16 00:14:54 2012] Detection parameters:
  Position = (290.2, 276.2) = 10 53 6.02 -40 19 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 9.7
  Background counts = 9.1
  Rate = 0.005 +/- 0.0009

[Mon Jul 16 00:14:54 2012] Off-axis axis estimate = 1.72'
[Mon Jul 16 00:41:12 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 00:41:12 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 16 00:41:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Jul 16 00:41:12 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.29"
[Mon Jul 16 00:50:07 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jul 16 00:50:07 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jul 16 00:50:07 2012] Fit fullrun_mos2_xmm0652660101_pi300-10000_cl_pass0_src4 appears to have run properly
[Mon Jul 16 00:50:07 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jul 16 00:50:07 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jul 16 00:50:07 2012] Fit fullrun_mos2_xmm0652660101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jul 16 00:50:13 2012] Spatial fit model total counts = 140.614000, observed total counts = 130.000000
[Mon Jul 16 00:50:13 2012] Offset between fit and detection position for source 3 = 0.340489 pixels
[Mon Jul 16 00:50:13 2012] 139.213800 total counts/ 103.414000 bgd. counts: snr = 3.520391
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.340489 pixels
  Position = (290.6, 276.2) = 10 53 5.89 -40 19 43.5
  Extent = 5.9 (4.6-8.3)", rotation angle = 0
  Source counts = 35.8 +/- 11.8
  Background counts = 103.4
  Rate = 0.003 +/- 0.001
[Mon Jul 16 00:50:13 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 00:50:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 00:50:13 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 00:50:13 2012] Source does appear to be extended
[Mon Jul 16 00:50:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 01:14:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 01:14:56 2012] Initial guess for spatial extent in simple fitting = 5.92"
[Mon Jul 16 01:14:56 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.866
[Mon Jul 16 01:14:56 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.92"
[Mon Jul 16 01:20:24 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 16 01:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 16 01:20:24 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 16 01:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 16 01:20:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 01:20:24 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 16 01:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jul 16 01:20:24 2012] fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 16 01:20:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jul 16 01:20:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652660101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 01:20:29 2012] Warning, spatial fit 3 centroid is now closest to src. 9
[Mon Jul 16 01:20:29 2012] Source 3 in spatial fitting is no longer close to this source
[Mon Jul 16 01:20:29 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 01:20:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 01:20:29 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 01:20:29 2012] Source does appear to be extended
[Mon Jul 16 01:20:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 01:32:59 2012] XMMSAS src. selection expression = ellipse(25231.703200, 23979.768000, 355.224010, 355.224010, 0.000000, X, Y)
[Mon Jul 16 01:32:59 2012] Writing source region out to fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul 16 01:32:59 2012] Extracting stamp from image fullrun_mos2_xmm0652660101_pi300-10000_cl_sm2.00.img.gz, (270, 256) - (311, 297)
[Mon Jul 16 01:32:59 2012] XMMSAS bgd. selection expression = annulus(25231.703200, 23979.768000, 592.040017, 1184.080034, X, Y)
[Mon Jul 16 01:32:59 2012] Writing fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3.gif
[Mon Jul 16 01:33:23 2012] Mean detx,y = (67.29, 91.86) 
[Mon Jul 16 01:33:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 01:33:31 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 01:33:31 2012] Setting source spectrum file to fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 16 01:33:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul 16 01:34:01 2012] Not generating rmf since there are only 35 counts
[Mon Jul 16 01:34:01 2012] rmf not generated due to insufficient counts
[Mon Jul 16 01:34:29 2012] Updating aperture counts using extracted products
[Mon Jul 16 01:34:29 2012] Error reading totcts from fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 16 01:34:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 01:34:30 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3.arf
[Mon Jul 16 01:34:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 01:34:30 2012] Updating source flux to 3.7e-14
[Mon Jul 16 01:34:31 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul 16 01:34:32 2012] xmm0652660101/analysis//spectral/fullrun_mos2_xmm0652660101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete