[Sat Jun  8 03:06:08 2013] Detection parameters:
  Position = (171.8, 267.8) = 15 22 6.96 -40 39 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3716.6 +/- 74.2
  Background counts = 55.8
  Rate = 0.4 +/- 0.008

[Sat Jun  8 03:06:09 2013] Off-axis axis estimate = 9.45'
[Sat Jun  8 03:06:29 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:06:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 03:06:29 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sat Jun  8 03:06:29 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sat Jun  8 03:06:29 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.15"
[Sat Jun  8 03:06:30 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  8 03:06:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 03:06:30 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  8 03:06:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_src1.csv
[Sat Jun  8 03:06:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 03:06:30 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  8 03:06:30 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  8 03:06:31 2013] Fit fullrun_pn_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  8 03:06:39 2013] Warning, spatial fit 1 centroid is now closest to src. 10
[Sat Jun  8 03:06:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 03:06:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 03:06:39 2013] Assessing source extent using major
[Sat Jun  8 03:06:39 2013] Source does appear to be extended
[Sat Jun  8 03:06:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 03:06:56 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:06:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 03:06:56 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sat Jun  8 03:06:56 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sat Jun  8 03:06:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.15"
[Sat Jun  8 03:06:56 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  8 03:06:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  8 03:06:56 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  8 03:06:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  8 03:06:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 03:06:56 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  8 03:06:56 2013] fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  8 03:06:56 2013] Fit fullrun_pn_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  8 03:07:03 2013] Spatial fit model total counts = 3970.540000, observed total counts = 3960.000000
[Sat Jun  8 03:07:03 2013] Offset between fit and detection position for source 1 = 0.133518 pixels
[Sat Jun  8 03:07:03 2013] 3984.340000 total counts/ 1413.500000 bgd. counts: snr = 68.379692
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.133518 pixels
  Position = (171.8, 267.7) = 15 22 6.94 -40 39 29.0
  Extent = 6.2 (6.0-6.4)", rotation angle = 0
  Source counts = 2570.8 +/- 63.1
  Background counts = 1413.5
  Rate = 0.2 +/- 0.004
[Sat Jun  8 03:07:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 03:07:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 03:07:03 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 03:07:03 2013] Source does appear to be extended
[Sat Jun  8 03:07:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 03:07:17 2013] Counts = 2570.840000, rescaling region sizes by 2.000000
[Sat Jun  8 03:07:17 2013] XMMSAS src. selection expression = ellipse(14901.696200, 23242.796600, 742.336821, 742.336821, 0.000000, X, Y)
[Sat Jun  8 03:07:17 2013] Not overwriting source region fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  8 03:07:17 2013] Extracting stamp from image fullrun_pn_xmm0652610101_pi300-10000_cl_sm2.00.img.gz, (129, 225) - (215, 310)
[Sat Jun  8 03:07:17 2013] XMMSAS bgd. selection expression = annulus(14901.696200, 23242.796600, 2474.456071, 4948.912142, X, Y) && !ellipse(18598.793200, 22837.098000, 419.066412, 419.066412, 0.000000, X, Y) && !ellipse(13660.759705, 24737.804779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15608.223694, 17982.273895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15136.174400, 25261.158400, 369.951211, 369.951211, 0.000000, X, Y)
[Sat Jun  8 03:07:17 2013] Writing fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1.gif
[Sat Jun  8 03:07:18 2013] ../../xmm0652610101/products/events/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0652610101/products/events/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Jun  8 03:07:18 2013] Mean detx,y = (10238.19, 632.06) 
[Sat Jun  8 03:07:18 2013] ../../xmm0652610101/products/images/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0652610101/products/images/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Jun  8 03:07:18 2013] ../../xmm0652610101/products/spectra/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0652610101/products/spectra/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Jun  8 03:07:18 2013] Setting source spectrum file to fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Jun  8 03:07:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  8 03:07:18 2013] ../../xmm0652610101/products/lightcurves/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0652610101/products/lightcurves/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Jun  8 03:10:06 2013] Updating aperture counts using extracted products
[Sat Jun  8 03:10:07 2013] Total counts from fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_src.pi.gz = 3464.00
[Sat Jun  8 03:10:07 2013] Total counts from fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 9315.00
[Sat Jun  8 03:10:07 2013] Got source and background scale factors 1737600.000000, 45818007.000000
[Sat Jun  8 03:10:07 2013] User source parameters:
  Position = (171.8, 267.7) = 15 22 6.94 -40 39 29.0
  Extent = 6.2 (6.0-6.4)", rotation angle = 0
  Source aperture counts = 3110.7 +/- 59.9
  Background aperture counts = 353.3
  Rate = 0.2 +/- 0.004

[Sat Jun  8 03:10:10 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 03:10:18 2013] Source 1 has no response, skipping
[Sat Jun  8 03:10:19 2013] xmm0652610101/analysis//spectral/fullrun_pn_xmm0652610101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete