[Sat Jun 8 03:06:11 2013] Detection parameters: Position = (158.6, 285.0) = 15 22 11.97 -40 38 12.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 65.7 +/- 11.7 Background counts = 13.0 Rate = 0.006 +/- 0.001 [Sat Jun 8 03:06:11 2013] Off-axis axis estimate = 10.18' [Sat Jun 8 03:06:32 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 03:06:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 03:06:32 2013] Initial guess for spatial extent in simple fitting = 11.52" [Sat Jun 8 03:06:32 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908 [Sat Jun 8 03:06:32 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.52" [Sat Jun 8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src4.ximg exists [Sat Jun 8 03:06:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src4.csv [Sat Jun 8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src4_1.ximg exists [Sat Jun 8 03:06:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src4.csv [Sat Jun 8 03:06:33 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Sat Jun 8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Sat Jun 8 03:06:33 2013] Fit fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Sat Jun 8 03:06:45 2013] Warning, spatial fit 4 centroid is now closest to src. 8 [Sat Jun 8 03:06:45 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 03:06:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 03:06:45 2013] Assessing source extent using major [Sat Jun 8 03:06:45 2013] Source does appear to be extended [Sat Jun 8 03:06:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 03:06:57 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 03:06:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 03:06:57 2013] Initial guess for spatial extent in simple fitting = 11.52" [Sat Jun 8 03:06:57 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.908 [Sat Jun 8 03:06:57 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.52" [Sat Jun 8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src4.ximg exists [Sat Jun 8 03:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src4.csv [Sat Jun 8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src4_1.ximg exists [Sat Jun 8 03:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src4.csv [Sat Jun 8 03:06:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Sat Jun 8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Sat Jun 8 03:06:58 2013] Fit fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Sat Jun 8 03:07:08 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.463143 pixels away [Sat Jun 8 03:07:08 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 03:07:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 03:07:08 2013] Assessing source extent using major [Sat Jun 8 03:07:08 2013] Source does appear to be extended [Sat Jun 8 03:07:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 03:07:29 2013] XMMSAS src. selection expression = ellipse(13753.906097, 24750.291382, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 03:07:29 2013] Not overwriting source region fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.reg [Sat Jun 8 03:07:29 2013] Extracting stamp from image fullrun_mos2_xmm0652610101_pi300-10000_cl_sm2.00.img.gz, (121, 248) - (196, 323) [Sat Jun 8 03:07:29 2013] XMMSAS bgd. selection expression = annulus(13753.906097, 24750.291382, 1087.500000, 2175.000000, X, Y) && !ellipse(14895.966160, 23234.972800, 470.878414, 470.878414, 0.000000, X, Y) && !ellipse(15150.131592, 25292.443046, 712.155836, 268.851191, 31.134148, X, Y) [Sat Jun 8 03:07:29 2013] Writing fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5.gif [Sat Jun 8 03:07:29 2013] ../../xmm0652610101/products/events/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0652610101/products/events/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create [Sat Jun 8 03:07:29 2013] Mean detx,y = (-10989.92, -2347.74) [Sat Jun 8 03:07:29 2013] ../../xmm0652610101/products/images/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0652610101/products/images/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create [Sat Jun 8 03:07:29 2013] ../../xmm0652610101/products/spectra/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.pi and ../../xmm0652610101/products/spectra/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create [Sat Jun 8 03:07:29 2013] Setting source spectrum file to fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.pi.gz [Sat Jun 8 03:07:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sat Jun 8 03:07:29 2013] ../../xmm0652610101/products/lightcurves/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0652610101/products/lightcurves/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create [Sat Jun 8 03:09:14 2013] Not generating rmf since there are only 65 counts [Sat Jun 8 03:09:14 2013] rmf not generated due to insufficient counts [Sat Jun 8 03:10:13 2013] Updating aperture counts using extracted products [Sat Jun 8 03:10:13 2013] Total counts from fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_src.pi.gz = 168.00 [Sat Jun 8 03:10:13 2013] Total counts from fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 728.00 [Sat Jun 8 03:10:13 2013] Got source and background scale factors 1342400.000000, 10040780.000000 [Sat Jun 8 03:10:13 2013] User source parameters: Position = (158.6, 285.0) = 15 22 11.97 -40 38 12.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 70.7 +/- 14.0 Background aperture counts = 97.3 Rate = 0.004 +/- 0.0007 [Sat Jun 8 03:10:13 2013] Updating counts from extracted products [Sat Jun 8 03:10:13 2013] Set source signif. to 70.67/9.87 = 7.16 [Sat Jun 8 03:10:14 2013] No arf file for this source, not re-computing flux [Sat Jun 8 03:10:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 03:10:18 2013] xmm0652610101/analysis//spectral/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete