[Sat Jun  8 03:06:11 2013] Detection parameters:
  Position = (288.6, 276.9) = 15 21 22.31 -40 38 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 988.6 +/- 37.4
  Background counts = 13.1
  Rate = 0.05 +/- 0.002

[Sat Jun  8 03:06:11 2013] Off-axis axis estimate = 1.72'
[Sat Jun  8 03:06:32 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:06:32 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  8 03:06:32 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sat Jun  8 03:06:32 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.29"
[Sat Jun  8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun  8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun  8 03:06:33 2013] Fit fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Jun  8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun  8 03:06:33 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun  8 03:06:33 2013] Fit fullrun_mos2_xmm0652610101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jun  8 03:06:45 2013] Spatial fit model total counts = 1008.950000, observed total counts = 959.000000
[Sat Jun  8 03:06:45 2013] Offset between fit and detection position for source 3 = 0.123446 pixels
[Sat Jun  8 03:06:45 2013] 1008.958000 total counts/ 337.167000 bgd. counts: snr = 36.585724
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.123446 pixels
  Position = (288.7, 276.8) = 15 21 22.27 -40 38 50.1
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source counts = 671.8 +/- 31.8
  Background counts = 337.2
  Rate = 0.04 +/- 0.002
[Sat Jun  8 03:06:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 03:06:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 03:06:45 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 03:06:45 2013] Source does appear to be extended
[Sat Jun  8 03:06:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 03:06:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 03:06:57 2013] Initial guess for spatial extent in simple fitting = 5.04"
[Sat Jun  8 03:06:57 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.817
[Sat Jun  8 03:06:57 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.04"
[Sat Jun  8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  8 03:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  8 03:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  8 03:06:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  8 03:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  8 03:06:58 2013] fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  8 03:06:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  8 03:06:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652610101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 03:07:08 2013] Warning, spatial fit 2 centroid is now closest to src. 2
[Sat Jun  8 03:07:08 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 03:07:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 03:07:08 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 03:07:08 2013] Source does appear to be extended
[Sat Jun  8 03:07:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 03:07:29 2013] XMMSAS src. selection expression = ellipse(25068.179600, 24033.208480, 302.648409, 302.648409, 0.000000, X, Y)
[Sat Jun  8 03:07:29 2013] Not overwriting source region fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun  8 03:07:29 2013] Extracting stamp from image fullrun_mos2_xmm0652610101_pi300-10000_cl_sm2.00.img.gz, (271, 259) - (306, 294)
[Sat Jun  8 03:07:29 2013] XMMSAS bgd. selection expression = annulus(25068.179600, 24033.208480, 504.414015, 1008.828029, X, Y)
[Sat Jun  8 03:07:29 2013] Writing fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3.gif
[Sat Jun  8 03:07:29 2013] ../../xmm0652610101/products/events/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0652610101/products/events/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Jun  8 03:07:29 2013] Mean detx,y = (64.93, 102.60) 
[Sat Jun  8 03:07:29 2013] ../../xmm0652610101/products/images/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0652610101/products/images/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Jun  8 03:07:29 2013] ../../xmm0652610101/products/spectra/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0652610101/products/spectra/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Jun  8 03:07:29 2013] Setting source spectrum file to fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Jun  8 03:07:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun  8 03:07:29 2013] ../../xmm0652610101/products/lightcurves/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0652610101/products/lightcurves/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Jun  8 03:10:12 2013] Updating aperture counts using extracted products
[Sat Jun  8 03:10:12 2013] Total counts from fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_src.pi.gz = 717.00
[Sat Jun  8 03:10:12 2013] Total counts from fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 272.00
[Sat Jun  8 03:10:12 2013] Got source and background scale factors 286400.000000, 2157328.000000
[Sat Jun  8 03:10:12 2013] User source parameters:
  Position = (288.7, 276.8) = 15 21 22.27 -40 38 50.1
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source aperture counts = 680.9 +/- 27.8
  Background aperture counts = 36.1
  Rate = 0.04 +/- 0.001

[Sat Jun  8 03:10:14 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 03:10:17 2013] Source 3 has no response, skipping
[Sat Jun  8 03:10:18 2013] xmm0652610101/analysis//spectral/fullrun_mos2_xmm0652610101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete