[Fri May 25 22:53:16 2012] Detection parameters:
  Position = (313.3, 366.1) = 16 53 51.98 39 49 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.8 +/- 12.0
  Background counts = 25.6
  Rate = 0.002 +/- 0.0003

[Fri May 25 22:53:17 2012] Off-axis axis estimate = 5.02'
[Sat May 26 01:32:56 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Sat May 26 01:32:56 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Sat May 26 01:32:56 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Sat May 26 01:32:56 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 8.94"
[Sat May 26 03:51:35 2012] fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_src40.ximg exists
[Sat May 26 03:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_src40.csv
[Sat May 26 03:51:35 2012] fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat May 26 03:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_src40.csv
[Sat May 26 03:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 03:51:36 2012] fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat May 26 03:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Sat May 26 03:51:36 2012] fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat May 26 03:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Sat May 26 03:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 03:51:55 2012] Source 21 is offset by 7.338849 and -3.372430 pixels which is larger than
2 X fitted extent = 1.121071 x 1.121071, not incorporating fit results
[Sat May 26 03:51:55 2012] Source 21 is offset by 3.139010 and -0.843488 pixels which is larger than
2 X fitted extent = 2.268575 x 2.268575, not incorporating fit results
[Sat May 26 03:51:55 2012] Warning, spatial fit 40 centroid is now closest to src. 22
[Sat May 26 03:51:55 2012] Vigneting correction estimate = 1.000000
[Sat May 26 03:51:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 03:51:55 2012] Assessing source extent using major
[Sat May 26 03:51:55 2012] Source does appear to be extended
[Sat May 26 03:51:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 03:51:55 2012] Deleting source due to low Poisson probability 0.9