[Fri May 25 22:52:48 2012] Detection parameters:
  Position = (228.5, 254.9) = 16 54 23.94 39 41 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.0 +/- 10.1
  Background counts = 16.4
  Rate = 0.002 +/- 0.0004

[Fri May 25 22:52:48 2012] Off-axis axis estimate = 5.97'
[Fri May 25 23:10:10 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Fri May 25 23:10:10 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Fri May 25 23:10:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.057
[Fri May 25 23:10:10 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.41"
[Sat May 26 01:32:55 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src24.ximg exists
[Sat May 26 01:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src24.csv
[Sat May 26 01:32:55 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat May 26 01:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src24.csv
[Sat May 26 01:32:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 01:32:56 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat May 26 01:32:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat May 26 01:32:56 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat May 26 01:32:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat May 26 01:32:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 03:51:46 2012] Spatial fit model total counts = 222.030000, observed total counts = 194.000000
[Sat May 26 03:51:46 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 26 03:51:46 2012] Vigneting correction estimate = 1.000000
[Sat May 26 03:51:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 03:51:46 2012] Assessing source extent using major
[Sat May 26 03:51:46 2012] Source does appear to be extended
[Sat May 26 03:51:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 03:51:46 2012] Deleting source due to low Poisson probability 0.9