[Fri May 25 22:52:47 2012] Detection parameters:
  Position = (317.3, 339.4) = 16 53 50.48 39 47 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.2 +/- 21.8
  Background counts = 32.5
  Rate = 0.004 +/- 0.0005

[Fri May 25 22:52:48 2012] Off-axis axis estimate = 3.27'
[Fri May 25 23:10:10 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Fri May 25 23:10:10 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Fri May 25 23:10:10 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Fri May 25 23:10:10 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.06"
[Sat May 26 01:32:55 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 26 01:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src9.csv
[Sat May 26 01:32:55 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 26 01:32:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src9.csv
[Sat May 26 01:32:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 01:32:56 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 26 01:32:56 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 26 01:32:56 2012] Fit fullrun_mos1_xmm0652570201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 26 03:51:46 2012] Warning, spatial fit 9 centroid is now closest to src. 31
[Sat May 26 03:51:46 2012] Vigneting correction estimate = 1.000000
[Sat May 26 03:51:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 03:51:46 2012] Assessing source extent using major
[Sat May 26 03:51:46 2012] Source does appear to be extended
[Sat May 26 03:51:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 03:51:46 2012] Source is confused with source 2
[Sat May 26 06:55:06 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:55:06 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Sat May 26 06:55:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.902
[Sat May 26 06:55:06 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.06"
[Sat May 26 07:39:34 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_src9.ximg exists
[Sat May 26 07:39:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_src9.csv
[Sat May 26 07:39:34 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat May 26 07:39:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_src9.csv
[Sat May 26 07:39:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 07:39:34 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat May 26 07:39:34 2012] fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 26 07:39:34 2012] Fit fullrun_mos1_xmm0652570201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat May 26 09:07:25 2012] Warning, spatial fit 9 centroid is now closest to src. 31
[Sat May 26 09:07:25 2012] Source 12 is offset by 0.968745 and 6.620039 pixels which is larger than
2 X fitted extent = 1.674276 x 1.674276, not incorporating fit results
[Sat May 26 09:07:25 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:07:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:07:25 2012] Assessing source extent using major
[Sat May 26 09:07:25 2012] Source does appear to be extended
[Sat May 26 09:07:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 10:10:22 2012] XMMSAS src. selection expression = ellipse(27555.560822, 29482.209381, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 10:10:22 2012] Writing source region out to fullrun_mos1_xmm0652570201_pi300-10000_pass1_cl_src12_src.reg
[Sat May 26 10:10:22 2012] Extracting stamp from image fullrun_mos1_xmm0652570201_pi300-10000_cl_sm2.00.img.gz, (280, 302) - (355, 377)
[Sat May 26 10:10:22 2012] XMMSAS bgd. selection expression = annulus(27555.560822, 29482.209381, 1087.500000, 2175.000000, X, Y) && !ellipse(27139.601600, 27501.015600, 1942.471256, 1942.471256, 0.000000, X, Y) && !ellipse(28237.616608, 27687.988373, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(28426.455566, 29434.870209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.443512, 29476.678955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25929.740356, 29475.181519, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 10:10:22 2012] Writing fullrun_mos1_xmm0652570201_pi300-10000_pass1_cl_src12.gif
[Sat May 26 10:21:40 2012] Mean detx,y = (2048.13, 208.10) 
[Sat May 26 10:21:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 10:21:50 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 10:21:50 2012] Setting source spectrum file to fullrun_mos1_xmm0652570201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat May 26 10:21:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652570201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat May 26 10:52:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 26 10:52:01 2012] rmf not generated due to insufficient counts
[Sat May 26 11:52:47 2012] Updating aperture counts using extracted products
[Sat May 26 11:52:47 2012] Error reading totcts from fullrun_mos1_xmm0652570201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat May 26 11:52:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 11:52:47 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos1_xmm0652570201_pi300-10000_pass1_cl_src12.arf
[Sat May 26 11:52:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 11:52:47 2012] Updating source flux to 3.9e-14
[Sat May 26 11:52:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting