[Mon Jun 18 13:18:23 2012] Detection parameters: Position = (292.0, 293.9) = 8 52 1.64 -46 16 31.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 460.0 +/- 61.7 Background counts = 1733.1 Rate = 0.008 +/- 0.001 [Mon Jun 18 13:18:23 2012] Off-axis axis estimate = 0.57' [Mon Jun 18 13:38:43 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting [Mon Jun 18 13:38:43 2012] Initial guess for spatial extent in simple fitting = 6.71" [Mon Jun 18 13:38:43 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958 [Mon Jun 18 13:38:43 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.71" [Mon Jun 18 17:24:33 2012] fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_src7.ximg exists [Mon Jun 18 17:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_src7.csv [Mon Jun 18 17:24:33 2012] fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_src7_1.ximg exists [Mon Jun 18 17:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_src7.csv [Mon Jun 18 17:24:33 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jun 18 17:24:34 2012] fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Mon Jun 18 17:24:34 2012] fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Mon Jun 18 17:24:34 2012] Fit fullrun_pn_xmm0652510101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Mon Jun 18 18:37:45 2012] Spatial fit model total counts = 22516.000000, observed total counts = 22515.000000 [Mon Jun 18 18:37:45 2012] Offset between fit and detection position for source 7 = 0.336378 pixels [Mon Jun 18 18:37:45 2012] Warning, changing simple spatial fit ID from 7 to 6 [Mon Jun 18 18:37:45 2012] 22556.776800 total counts/ 22496.000000 bgd. counts: snr = 0.405215 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.336378 pixels Position = (292.1, 294.3) = 8 52 1.60 -46 16 31.3 Extent = 2.9 (1.6-7.3)", rotation angle = 0 Source counts = 60.8 +/- 150.2 Background counts = 22496.0 Rate = 0.0007 +/- 0.002 Deleting source due to low Poisson probability