[Wed Aug 8 16:00:34 2012] Detection parameters: Position = (324.5, 374.4) = 2 56 2.75 19 26 33.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 118.1 +/- 27.4 Background counts = 337.6 Rate = 0.002 +/- 0.0004 [Wed Aug 8 16:00:35 2012] Off-axis axis estimate = 5.82' [Wed Aug 8 16:10:53 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 16:10:53 2012] Initial guess for spatial extent in simple fitting = 9.34" [Wed Aug 8 16:10:53 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.892 [Wed Aug 8 16:10:53 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.34" [Wed Aug 8 16:56:30 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_src15.ximg exists [Wed Aug 8 16:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_src15.csv [Wed Aug 8 16:56:30 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_src15_1.ximg exists [Wed Aug 8 16:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_src15.csv [Wed Aug 8 16:56:30 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 16:56:31 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Wed Aug 8 16:56:31 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Wed Aug 8 16:56:31 2012] Fit fullrun_pn_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Wed Aug 8 18:07:17 2012] Spatial fit model total counts = 1551.700000, observed total counts = 1551.000000 [Wed Aug 8 18:07:17 2012] Offset between fit and detection position for source 20 = 7.783698 pixels [Wed Aug 8 18:07:17 2012] 1501.519000 total counts/ 1308.430000 bgd. counts: snr = 5.338046 Spatial fit parameters: Offset between fit and detection position for source 20 = 7.783698 pixels Position = (331.9, 372.0) = 2 56 0.47 19 26 20.5 Extent = 18.7 (18.7-37.4)", rotation angle = 0 Source counts = 193.1 +/- 38.7 Background counts = 1308.4 Rate = 0.003 +/- 0.0006 [Wed Aug 8 18:07:17 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 18:07:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 18:07:17 2012] Assessing source extent using major axis lower bound [Wed Aug 8 18:07:17 2012] Source does appear to be extended [Wed Aug 8 18:07:17 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 18:07:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 8 18:07:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 8 18:07:47 2012] Initial guess for spatial extent in simple fitting = 18.68" [Wed Aug 8 18:07:47 2012] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.088 [Wed Aug 8 18:07:47 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 18.68" [Wed Aug 8 18:42:00 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_src15.ximg exists [Wed Aug 8 18:42:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_src15.csv [Wed Aug 8 18:42:00 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_src15_1.ximg exists [Wed Aug 8 18:42:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_src15.csv [Wed Aug 8 18:42:00 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 8 18:42:00 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Wed Aug 8 18:42:00 2012] fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Wed Aug 8 18:42:00 2012] Fit fullrun_pn_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Wed Aug 8 19:53:43 2012] Warning, spatial fit 15 centroid is now closest to src. 4 [Wed Aug 8 19:53:43 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 19:53:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 19:53:43 2012] Assessing source extent using major axis lower bound [Wed Aug 8 19:53:43 2012] Source does appear to be extended [Wed Aug 8 19:53:43 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 8 19:54:12 2012] XMMSAS src. selection expression = ellipse(28822.552000, 32314.678000, 1120.740032, 1120.740032, 0.000000, X, Y) [Wed Aug 8 19:54:12 2012] Writing source region out to fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20_src.reg [Wed Aug 8 19:54:12 2012] Extracting stamp from image fullrun_pn_xmm0652480301_pi300-10000_cl_sm2.00.img.gz, (267, 308) - (396, 436) [Wed Aug 8 19:54:12 2012] XMMSAS bgd. selection expression = annulus(28822.552000, 32314.678000, 1867.900054, 3735.800107, X, Y) && !ellipse(26878.000000, 32481.914581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31420.510864, 32302.864716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.442444, 35715.251740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.228241, 32934.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.997345, 32219.610962, 870.000000, 870.000000, 0.000000, X, Y) [Wed Aug 8 19:54:12 2012] Writing fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20.gif [Wed Aug 8 20:22:00 2012] Mean detx,y = (-276.95, -5462.18) [Wed Aug 8 20:22:05 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 8 20:22:47 2012] Binned source spectrum to 10 counts/bin [Wed Aug 8 20:22:48 2012] Setting source spectrum file to fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Wed Aug 8 20:22:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20_bgd.pi.gz [Wed Aug 8 21:46:37 2012] Updating aperture counts using extracted products [Wed Aug 8 21:46:37 2012] Error reading totcts from fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Wed Aug 8 21:46:39 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 8 21:46:39 2012] Using photon index=1.80, rate=0.00306, arf fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20.arf [Wed Aug 8 21:46:39 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 8 21:46:39 2012] Updating source flux to 9.2e-15 [Wed Aug 8 21:48:36 2012] Reading fit data from xmm0652480301/analysis//spectral/fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20_pl.csv [Wed Aug 8 21:48:36 2012] Spectral fit parameter nH value = 1.40254e+23 [Wed Aug 8 21:48:36 2012] Spectral fit parameter PhoIndex value = 2.6668 [Wed Aug 8 21:48:36 2012] Failed to get F(0.3-8.0) from xmm0652480301/analysis//spectral/fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20_pl.csv, possibly due to different flux energy range selected [Wed Aug 8 21:48:36 2012] Calculating source flux in energy range 0.30-8.00 [Wed Aug 8 21:48:36 2012] Using Nh = 1.4e+23, photon index=2.67, rate=0.00306, arf fullrun_pn_xmm0652480301_pi300-10000_pass1_cl_src20.arf [Wed Aug 8 21:48:36 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Aug 8 21:48:36 2012] Updating source flux to 3.9e-14