[Wed Aug  8 16:01:51 2012] Detection parameters:
  Position = (351.7, 229.1) = 2 55 54.39 19 15 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.1 +/- 23.2
  Background counts = 150.5
  Rate = 0.002 +/- 0.0003

[Wed Aug  8 16:01:51 2012] Off-axis axis estimate = 6.34'
[Wed Aug  8 17:11:54 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 17:11:54 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Aug  8 17:11:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.024
[Wed Aug  8 17:11:54 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.60"
[Wed Aug  8 18:07:06 2012] fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_src12.ximg exists
[Wed Aug  8 18:07:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_src12.csv
[Wed Aug  8 18:07:06 2012] fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Aug  8 18:07:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_src12.csv
[Wed Aug  8 18:07:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 18:07:07 2012] fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Aug  8 18:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Aug  8 18:07:07 2012] fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Aug  8 18:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Aug  8 18:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 18:07:31 2012] Warning, spatial fit 12 centroid is now closest to src. 24
[Wed Aug  8 18:07:31 2012] Spatial fit model total counts = 735.287000, observed total counts = 732.000000
[Wed Aug  8 18:07:31 2012] Offset between fit and detection position for source 28 = 0.416126 pixels
[Wed Aug  8 18:07:31 2012] Warning, changing simple spatial fit ID from 12 to 19
[Wed Aug  8 18:07:31 2012] 734.101400 total counts/ 708.292000 bgd. counts: snr = 0.969777
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.416126 pixels
  Position = (351.7, 229.5) = 2 55 54.38 19 16 0.8
  Extent = 5.5 (2.3-8.8)", rotation angle = 0
  Source counts = 25.8 +/- 27.1
  Background counts = 708.3
  Rate = 0.0003 +/- 0.0003
  Deleting source due to low Poisson probability