[Wed Aug  8 16:01:08 2012] Detection parameters:
  Position = (373.5, 411.1) = 2 55 47.65 19 29 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 449.9 +/- 30.4
  Background counts = 140.7
  Rate = 0.007 +/- 0.0005

[Wed Aug  8 16:01:09 2012] Off-axis axis estimate = 9.82'
[Wed Aug  8 16:56:31 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 16:56:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 16:56:31 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Aug  8 16:56:31 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.088
[Wed Aug  8 16:56:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.34"
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug  8 17:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src3.csv
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug  8 17:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src3.csv
[Wed Aug  8 17:11:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug  8 17:11:53 2012] Fit fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug  8 18:07:21 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.761003 pixels away
[Wed Aug  8 18:07:21 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 18:07:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 18:07:21 2012] Assessing source extent using major
[Wed Aug  8 18:07:21 2012] Source does appear to be extended
[Wed Aug  8 18:07:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 18:42:00 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 18:42:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 18:42:00 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Aug  8 18:42:00 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.088
[Wed Aug  8 18:42:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.34"
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug  8 18:55:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src3.csv
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug  8 18:55:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src3.csv
[Wed Aug  8 18:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug  8 18:55:38 2012] Fit fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug  8 19:53:47 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.761003 pixels away
[Wed Aug  8 19:53:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 19:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 19:53:47 2012] Assessing source extent using major
[Wed Aug  8 19:53:47 2012] Source does appear to be extended
[Wed Aug  8 19:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 20:45:45 2012] XMMSAS src. selection expression = ellipse(32446.937225, 35718.841339, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  8 20:45:45 2012] Writing source region out to fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src7_src.reg
[Wed Aug  8 20:45:45 2012] Extracting stamp from image fullrun_mos1_xmm0652480301_pi300-10000_cl_sm2.00.img.gz, (336, 374) - (411, 449)
[Wed Aug  8 20:45:45 2012] XMMSAS bgd. selection expression = annulus(32446.937225, 35718.841339, 1087.500000, 2175.000000, X, Y)
[Wed Aug  8 20:45:45 2012] Writing fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src7.gif
[Wed Aug  8 20:52:43 2012] Mean detx,y = (9860.19, 2068.13) 
[Wed Aug  8 20:52:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 20:52:57 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 20:52:57 2012] Setting source spectrum file to fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Aug  8 20:52:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Aug  8 21:03:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  8 21:03:45 2012] rmf not generated due to insufficient counts
[Wed Aug  8 21:46:40 2012] Updating aperture counts using extracted products
[Wed Aug  8 21:46:40 2012] Error reading totcts from fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Aug  8 21:46:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 21:46:41 2012] Using photon index=1.80, rate=0.00699, arf fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src7.arf
[Wed Aug  8 21:46:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 21:46:41 2012] Updating source flux to 1.1e-13
[Wed Aug  8 21:46:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting