[Wed Aug  8 16:01:08 2012] Detection parameters:
  Position = (306.8, 374.9) = 2 56 8.17 19 26 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17461.1 +/- 159.3
  Background counts = 176.4
  Rate = 0.2 +/- 0.002

[Wed Aug  8 16:01:09 2012] Off-axis axis estimate = 5.58'
[Wed Aug  8 16:56:31 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 16:56:31 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Wed Aug  8 16:56:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.093
[Wed Aug  8 16:56:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.22"
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 17:11:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 17:11:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 17:11:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 17:11:53 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 17:11:53 2012] Fit fullrun_mos1_xmm0652480301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 18:07:21 2012] Spatial fit model total counts = 15200.300000, observed total counts = 15194.000000
[Wed Aug  8 18:07:21 2012] Offset between fit and detection position for source 4 = 0.199230 pixels
[Wed Aug  8 18:07:21 2012] 15195.380000 total counts/ 4143.880000 bgd. counts: snr = 171.679185
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.199230 pixels
  Position = (306.6, 374.8) = 2 56 8.23 19 26 32.9
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 11051.5 +/- 123.3
  Background counts = 4143.9
  Rate = 0.1 +/- 0.001
[Wed Aug  8 18:07:21 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 18:07:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 18:07:21 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 18:07:21 2012] Source does appear to be extended
[Wed Aug  8 18:07:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 18:42:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 18:42:00 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Wed Aug  8 18:42:00 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.988
[Wed Aug  8 18:42:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 18:55:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 18:55:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 18:55:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 18:55:38 2012] fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 18:55:38 2012] Fit fullrun_mos1_xmm0652480301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 19:53:47 2012] Spatial fit model total counts = 14939.900000, observed total counts = 14940.000000
[Wed Aug  8 19:53:47 2012] Offset between fit and detection position for source 4 = 0.007235 pixels
[Wed Aug  8 19:53:47 2012] 14994.620000 total counts/ 4086.320000 bgd. counts: snr = 170.643947
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.007235 pixels
  Position = (306.6, 374.8) = 2 56 8.23 19 26 32.9
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 10908.3 +/- 122.5
  Background counts = 4086.3
  Rate = 0.1 +/- 0.001
[Wed Aug  8 19:53:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 19:53:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 19:53:47 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 19:53:47 2012] Source does appear to be extended
[Wed Aug  8 19:53:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 20:45:45 2012] Counts = 10908.300000, rescaling region sizes by 3.000000
[Wed Aug  8 20:45:45 2012] XMMSAS src. selection expression = ellipse(26628.115000, 32561.651740, 958.446028, 958.446028, 0.000000, X, Y)
[Wed Aug  8 20:45:45 2012] Writing source region out to fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug  8 20:45:45 2012] Extracting stamp from image fullrun_mos1_xmm0652480301_pi300-10000_cl_sm2.00.img.gz, (252, 320) - (362, 430)
[Wed Aug  8 20:45:45 2012] XMMSAS bgd. selection expression = annulus(26628.115000, 32561.651740, 4792.230138, 9584.460276, X, Y) && !ellipse(35771.987061, 24832.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31404.764400, 32288.796600, 367.364011, 367.364011, 0.000000, X, Y) && !ellipse(32446.937225, 35718.841339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21839.204422, 22239.568237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17148.962418, 34585.988129, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 20:45:45 2012] Writing fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4.gif
[Wed Aug  8 20:46:08 2012] Mean detx,y = (5160.54, -2590.65) 
[Wed Aug  8 20:46:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 20:49:22 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 20:49:22 2012] Setting source spectrum file to fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug  8 20:49:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug  8 21:46:40 2012] Updating aperture counts using extracted products
[Wed Aug  8 21:46:40 2012] Error reading totcts from fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug  8 21:46:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 21:46:40 2012] Using photon index=1.80, rate=0.115, arf fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4.arf
[Wed Aug  8 21:46:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 21:46:40 2012] Updating source flux to 1.2e-12
[Wed Aug  8 21:47:32 2012] Reading fit data from xmm0652480301/analysis//spectral/fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4_pl.csv
[Wed Aug  8 21:47:32 2012] Spectral fit parameter nH value = 6.93274e+22
[Wed Aug  8 21:47:32 2012] Spectral fit parameter PhoIndex value = 1.35215
[Wed Aug  8 21:47:32 2012] Failed to get F(0.3-8.0) from xmm0652480301/analysis//spectral/fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 21:47:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 21:47:32 2012] Using Nh = 6.9e+22, photon index=1.35, rate=0.115, arf fullrun_mos1_xmm0652480301_pi300-10000_pass1_cl_src4.arf
[Wed Aug  8 21:47:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 21:47:32 2012] Updating source flux to 4.1e-12