[Fri Jul 13 10:21:01 2012] Detection parameters:
  Position = (289.6, 365.0) = 0 46 21.86 20 38 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.2 +/- 18.8
  Background counts = 94.0
  Rate = 0.005 +/- 0.001

[Fri Jul 13 10:21:02 2012] Off-axis axis estimate = 4.87'
[Fri Jul 13 10:24:35 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 10:24:35 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Fri Jul 13 10:24:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.165
[Fri Jul 13 10:24:35 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.86"
[Fri Jul 13 11:48:44 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jul 13 11:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_src23.csv
[Fri Jul 13 11:48:44 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jul 13 11:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_src23.csv
[Fri Jul 13 11:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 11:48:44 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jul 13 11:48:44 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jul 13 11:48:44 2012] Fit fullrun_pn_xmm0652460201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Jul 13 13:22:10 2012] Warning, spatial fit 23 centroid is now closest to src. 24
[Fri Jul 13 13:22:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 13:22:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 13:22:10 2012] Assessing source extent using major
[Fri Jul 13 13:22:10 2012] Source does appear to be extended
[Fri Jul 13 13:22:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 13:22:10 2012] Source is confused with source 24
[Fri Jul 13 13:22:27 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 13:22:27 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Fri Jul 13 13:22:27 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.165
[Fri Jul 13 13:22:27 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.86"
[Fri Jul 13 14:36:01 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_src21.ximg exists
[Fri Jul 13 14:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_src21.csv
[Fri Jul 13 14:36:01 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Jul 13 14:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_src21.csv
[Fri Jul 13 14:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 14:36:02 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Jul 13 14:36:02 2012] fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Jul 13 14:36:02 2012] Fit fullrun_pn_xmm0652460201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Jul 13 16:05:26 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.130593 pixels away
[Fri Jul 13 16:05:26 2012] Source 23 is offset by -9.251440 and -0.875128 pixels which is larger than
2 X fitted extent = 0.985076 x 0.985076, not incorporating fit results
[Fri Jul 13 16:05:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 16:05:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 16:05:26 2012] Assessing source extent using major
[Fri Jul 13 16:05:26 2012] Source does appear to be extended
[Fri Jul 13 16:05:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 16:05:42 2012] XMMSAS src. selection expression = ellipse(25149.238739, 31706.977905, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 16:05:42 2012] Writing source region out to fullrun_pn_xmm0652460201_pi300-10000_pass1_cl_src23_src.reg
[Fri Jul 13 16:05:42 2012] Extracting stamp from image fullrun_pn_xmm0652460201_pi300-10000_cl_sm2.00.img.gz, (252, 328) - (327, 403)
[Fri Jul 13 16:05:42 2012] XMMSAS bgd. selection expression = annulus(25149.238739, 31706.977905, 1087.500000, 2175.000000, X, Y) && !ellipse(24354.639600, 30165.094600, 895.824026, 814.320023, 109.679580, X, Y) && !ellipse(25249.126000, 29376.370000, 1286.816037, 1286.816037, 0.000000, X, Y) && !ellipse(27116.243744, 31344.014160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23544.286804, 29119.962494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24640.312103, 31607.626709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25242.326721, 31011.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22795.326000, 31342.952000, 1408.232041, 1408.232041, 0.000000, X, Y) && !ellipse(22846.818573, 29245.149780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24531.187744, 28748.587616, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 16:05:42 2012] Writing fullrun_pn_xmm0652460201_pi300-10000_pass1_cl_src23.gif
[Fri Jul 13 16:23:34 2012] Mean detx,y = (-3772.50, -3637.33) 
[Fri Jul 13 16:23:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 16:23:54 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 16:23:54 2012] Setting source spectrum file to fullrun_pn_xmm0652460201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 13 16:23:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0652460201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jul 13 16:47:27 2012] Not generating rmf since there are only 98 counts
[Fri Jul 13 16:47:27 2012] rmf not generated due to insufficient counts
[Fri Jul 13 18:02:09 2012] Updating aperture counts using extracted products
[Fri Jul 13 18:02:09 2012] Error reading totcts from fullrun_pn_xmm0652460201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 13 18:02:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 18:02:10 2012] Using photon index=1.80, rate=0.00512, arf fullrun_pn_xmm0652460201_pi300-10000_pass1_cl_src23.arf
[Fri Jul 13 18:02:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 18:02:10 2012] Updating source flux to 1.7e-14
[Fri Jul 13 18:04:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting