[Mon Mar 26 07:17:48 2012] Detection parameters:
  Position = (234.9, 181.1) = 0 46 36.55 20 15 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.9 +/- 23.0
  Background counts = 180.2
  Rate = 0.003 +/- 0.0006

[Mon Mar 26 07:17:49 2012] Off-axis axis estimate = 9.67'
[Mon Mar 26 07:24:37 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 07:24:37 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Mon Mar 26 07:24:37 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon Mar 26 07:24:37 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.27"
[Mon Mar 26 08:56:26 2012] fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_src18.ximg exists
[Mon Mar 26 08:56:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_src18.csv
[Mon Mar 26 08:56:26 2012] fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Mar 26 08:56:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_src18.csv
[Mon Mar 26 08:56:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 08:56:27 2012] fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Mar 26 08:56:27 2012] fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Mar 26 08:56:27 2012] Fit fullrun_pn_xmm0652460101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Mar 26 14:10:21 2012] Spatial fit model total counts = 1035.090000, observed total counts = 1034.000000
[Mon Mar 26 14:10:21 2012] Offset between fit and detection position for source 19 = 0.944875 pixels
[Mon Mar 26 14:10:21 2012] 1037.182300 total counts/ 1009.500000 bgd. counts: snr = 0.871262
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.944875 pixels
  Position = (234.2, 180.4) = 0 46 36.75 20 15 26.7
  Extent = 4.9 (2.8-8.3)", rotation angle = 0
  Source counts = 27.7 +/- 32.2
  Background counts = 1009.5
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability