[Fri Mar 30 14:53:02 2012] Detection parameters:
  Position = (210.5, 202.7) = 3 57 54.62 -46 19 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.3 +/- 13.2
  Background counts = 32.9
  Rate = 0.002 +/- 0.0004

[Fri Mar 30 14:53:02 2012] Off-axis axis estimate = 9.42'
[Fri Mar 30 17:37:50 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 17:37:50 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Fri Mar 30 17:37:50 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.121
[Fri Mar 30 17:37:50 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.14"
[Fri Mar 30 19:15:44 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Mar 30 19:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src15.csv
[Fri Mar 30 19:15:44 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Mar 30 19:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src15.csv
[Fri Mar 30 19:15:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 19:15:45 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Mar 30 19:15:45 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Mar 30 19:15:45 2012] Fit fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Mar 30 20:52:03 2012] Spatial fit model total counts = 443.969000, observed total counts = 444.000000
[Fri Mar 30 20:52:03 2012] Offset between fit and detection position for source 33 = 6.909260 pixels
[Fri Mar 30 20:52:03 2012] 423.212000 total counts/ 164.559000 bgd. counts: snr = 20.163072
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 6.909260 pixels
  Position = (213.4, 209.0) = 3 57 53.37 -46 18 38.9
  Extent = 22.3 (12.1-44.6)", rotation angle = 0
  Source counts = 258.7 +/- 20.6
  Background counts = 164.6
  Rate = 0.005 +/- 0.0004
[Fri Mar 30 20:52:03 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 20:52:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 20:52:03 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 20:52:03 2012] Source does appear to be extended
[Fri Mar 30 20:52:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 20:52:03 2012] Source is confused with source 31
[Fri Mar 30 23:27:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:27:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 23:27:56 2012] Initial guess for spatial extent in simple fitting = 22.28"
[Fri Mar 30 23:27:56 2012] source mask rpix=5.1, npix_max = 126, mask sum = 132, frac = 1.044
[Fri Mar 30 23:27:56 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 22.28"
[Sat Mar 31 01:02:14 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Mar 31 01:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src15.csv
[Sat Mar 31 01:02:14 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Mar 31 01:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src15.csv
[Sat Mar 31 01:02:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 01:02:14 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Mar 31 01:02:14 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Mar 31 01:02:14 2012] Fit fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Mar 31 02:45:55 2012] Warning, spatial fit 15 centroid is now closest to src. 31
[Sat Mar 31 02:45:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 02:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 02:45:55 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 02:45:55 2012] Source does appear to be extended
[Sat Mar 31 02:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:21:20 2012] XMMSAS src. selection expression = ellipse(18520.714000, 18132.602000, 1336.854038, 1336.854038, 0.000000, X, Y)
[Sat Mar 31 05:21:20 2012] Writing source region out to fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src33_src.reg
[Sat Mar 31 05:21:20 2012] Extracting stamp from image fullrun_mos1_xmm0652450101_pi300-10000_cl_sm2.00.img.gz, (137, 132) - (290, 286)
[Sat Mar 31 05:21:20 2012] XMMSAS bgd. selection expression = annulus(18520.714000, 18132.602000, 2228.090064, 4456.180128, X, Y) && !ellipse(18222.056000, 18655.526000, 590.008017, 590.008017, 0.000000, X, Y) && !ellipse(14662.207550, 20347.133713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20135.089798, 22318.640320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17766.804993, 23115.603119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15296.436966, 13336.199631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18701.789200, 18132.193400, 436.357613, 436.357613, 0.000000, X, Y) && !ellipse(20200.246600, 16770.506400, 252.411207, 252.411207, 0.000000, X, Y) && !ellipse(16244.225342, 13608.486160, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 05:21:20 2012] Writing fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src33.gif
[Sat Mar 31 05:28:36 2012] Mean detx,y = (9237.70, -468.24) 
[Sat Mar 31 05:28:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:30:01 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:30:01 2012] Setting source spectrum file to fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar 31 05:30:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Mar 31 07:40:42 2012] Updating aperture counts using extracted products
[Sat Mar 31 07:40:42 2012] Error reading totcts from fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar 31 07:40:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 07:40:44 2012] Using photon index=1.80, rate=0.00472, arf fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src33.arf
[Sat Mar 31 07:40:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 07:40:44 2012] Updating source flux to 6.2e-14
[Sat Mar 31 07:40:54 2012] Flag c found in src. 33 procflags, skipping spectral fitting