[Fri Mar 30 14:53:00 2012] Detection parameters:
  Position = (270.1, 300.7) = 3 57 29.57 -46 11 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 12.9
  Background counts = 36.4
  Rate = 0.001 +/- 0.0002

[Fri Mar 30 14:53:02 2012] Off-axis axis estimate = 2.06'
[Fri Mar 30 17:37:50 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 17:37:50 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Fri Mar 30 17:37:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.019
[Fri Mar 30 17:37:50 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.46"
[Fri Mar 30 19:15:45 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src35.ximg exists
[Fri Mar 30 19:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src35.csv
[Fri Mar 30 19:15:45 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Mar 30 19:15:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src35.csv
[Fri Mar 30 19:15:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 19:15:45 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Mar 30 19:15:45 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Mar 30 19:15:45 2012] Fit fullrun_mos1_xmm0652450101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Mar 30 20:52:03 2012] Warning, spatial fit 35 centroid is now closest to src. 23
[Fri Mar 30 20:52:03 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 20:52:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 20:52:03 2012] Assessing source extent using major
[Fri Mar 30 20:52:03 2012] Source does appear to be extended
[Fri Mar 30 20:52:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:27:56 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:27:56 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Fri Mar 30 23:27:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.019
[Fri Mar 30 23:27:56 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 7.46"
[Sat Mar 31 01:02:14 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src35.ximg exists
[Sat Mar 31 01:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src35.csv
[Sat Mar 31 01:02:14 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Mar 31 01:02:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src35.csv
[Sat Mar 31 01:02:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 01:02:15 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Mar 31 01:02:15 2012] fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Mar 31 01:02:15 2012] Fit fullrun_mos1_xmm0652450101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Mar 31 02:45:55 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 32.130927 pixels away
[Sat Mar 31 02:45:55 2012] Source 16 is offset by -5.762809 and 6.540867 pixels which is larger than
2 X fitted extent = 2.527862 x 2.527862, not incorporating fit results
[Sat Mar 31 02:45:55 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 02:45:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 02:45:55 2012] Assessing source extent using major
[Sat Mar 31 02:45:55 2012] Source does appear to be extended
[Sat Mar 31 02:45:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:21:21 2012] XMMSAS src. selection expression = ellipse(23449.045593, 26110.797424, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 05:21:21 2012] Writing source region out to fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src16_src.reg
[Sat Mar 31 05:21:21 2012] Extracting stamp from image fullrun_mos1_xmm0652450101_pi300-10000_cl_sm2.00.img.gz, (233, 263) - (308, 338)
[Sat Mar 31 05:21:21 2012] XMMSAS bgd. selection expression = annulus(23449.045593, 26110.797424, 1087.500000, 2175.000000, X, Y) && !ellipse(22390.046460, 25999.870400, 390.046411, 390.046411, 0.000000, X, Y) && !ellipse(23928.259800, 25330.965200, 389.383211, 389.383211, 0.000000, X, Y) && !ellipse(25040.370000, 26827.635800, 414.684012, 414.684012, 0.000000, X, Y) && !ellipse(21294.080444, 26081.963806, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 05:21:21 2012] Writing fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src16.gif
[Sat Mar 31 05:38:58 2012] Mean detx,y = (3.71, 647.91) 
[Sat Mar 31 05:39:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:39:15 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:39:16 2012] Setting source spectrum file to fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Mar 31 05:39:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Mar 31 06:19:07 2012] Not generating rmf since there are only 61 counts
[Sat Mar 31 06:19:07 2012] rmf not generated due to insufficient counts
[Sat Mar 31 07:40:43 2012] Updating aperture counts using extracted products
[Sat Mar 31 07:40:43 2012] Error reading totcts from fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Mar 31 07:40:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 07:40:45 2012] Using photon index=1.80, rate=0.00113, arf fullrun_mos1_xmm0652450101_pi300-10000_pass1_cl_src16.arf
[Sat Mar 31 07:40:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 07:40:45 2012] Updating source flux to 1.1e-14
[Sat Mar 31 07:40:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting