[Fri Jul 27 10:56:49 2012] Detection parameters:
  Position = (470.3, 293.9) = 2 26 12.30 0 34 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 641.6 +/- 33.4
  Background counts = 89.2
  Rate = 0.02 +/- 0.0009

[Fri Jul 27 10:56:49 2012] Off-axis axis estimate = 12.47'
[Fri Jul 27 11:16:49 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 11:16:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 11:16:49 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Fri Jul 27 11:16:49 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.903
[Fri Jul 27 11:16:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.66"
[Fri Jul 27 11:26:09 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 11:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 11:26:09 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 11:26:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 11:26:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:26:09 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 11:26:09 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 11:26:09 2012] Fit fullrun_mos2_xmm0652401901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 11:26:17 2012] Spatial fit model total counts = 1257.990000, observed total counts = 1258.000000
[Fri Jul 27 11:26:17 2012] Offset between fit and detection position for source 1 = 0.213464 pixels
[Fri Jul 27 11:26:17 2012] 1261.583000 total counts/ 978.829000 bgd. counts: snr = 9.037646
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.213464 pixels
  Position = (470.1, 293.9) = 2 26 12.36 0 34 0.5
  Extent = 4.8 (4.3-5.7)", rotation angle = 0
  Source counts = 282.8 +/- 35.5
  Background counts = 978.8
  Rate = 0.01 +/- 0.001
[Fri Jul 27 11:26:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:26:17 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:26:17 2012] Source does appear to be extended
[Fri Jul 27 11:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 11:36:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 11:36:38 2012] Initial guess for spatial extent in simple fitting = 4.84"
[Fri Jul 27 11:36:38 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.865
[Fri Jul 27 11:36:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.84"
[Fri Jul 27 11:44:37 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 11:44:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 11:44:37 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 11:44:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 11:44:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:44:37 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 11:44:37 2012] fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 11:44:37 2012] Fit fullrun_mos2_xmm0652401901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 11:44:43 2012] Spatial fit model total counts = 788.684000, observed total counts = 789.000000
[Fri Jul 27 11:44:43 2012] Offset between fit and detection position for source 1 = 0.020050 pixels
[Fri Jul 27 11:44:43 2012] 787.175000 total counts/ 514.188000 bgd. counts: snr = 12.038739
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020050 pixels
  Position = (470.1, 293.9) = 2 26 12.36 0 34 0.6
  Extent = 4.7 (4.1-5.4)", rotation angle = 0
  Source counts = 273.0 +/- 28.1
  Background counts = 514.2
  Rate = 0.01 +/- 0.001
[Fri Jul 27 11:44:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:44:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:44:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:44:43 2012] Source does appear to be extended
[Fri Jul 27 11:44:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:00:14 2012] XMMSAS src. selection expression = ellipse(40851.797220, 25518.443600, 281.526008, 281.526008, 0.000000, X, Y)
[Fri Jul 27 12:00:14 2012] Writing source region out to fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 12:00:14 2012] Extracting stamp from image fullrun_mos2_xmm0652401901_pi300-10000_cl_sm2.00.img.gz, (454, 278) - (486, 310)
[Fri Jul 27 12:00:14 2012] XMMSAS bgd. selection expression = annulus(40851.797220, 25518.443600, 469.210014, 938.420027, X, Y)
[Fri Jul 27 12:00:14 2012] Writing fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 12:00:19 2012] Mean detx,y = (-12469.25, 4450.59) 
[Fri Jul 27 12:00:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 12:00:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 12:00:32 2012] Setting source spectrum file to fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 12:00:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 12:09:20 2012] Updating aperture counts using extracted products
[Fri Jul 27 12:09:21 2012] Error reading totcts from fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 12:09:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 12:09:21 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 12:09:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 12:09:21 2012] Updating source flux to 3.1e-13
[Fri Jul 27 12:09:58 2012] Reading fit data from xmm0652401901/analysis//spectral/fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 12:09:58 2012] Spectral fit parameter nH value = 4.399e+15
[Fri Jul 27 12:09:58 2012] Spectral fit parameter PhoIndex value = 2.05709
[Fri Jul 27 12:09:58 2012] Failed to get F(0.3-8.0) from xmm0652401901/analysis//spectral/fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 12:09:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 12:09:58 2012] Using Nh = 4.4e+15, photon index=2.06, rate=0.0107, arf fullrun_mos2_xmm0652401901_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 12:09:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 12:09:58 2012] Updating source flux to 2.7e-13