[Sun Jun  9 21:35:48 2013] Detection parameters:
  Position = (371.0, 305.8) = 23 31 49.39 0 7 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.3 +/- 16.4
  Background counts = 51.7
  Rate = 0.005 +/- 0.0006

[Sun Jun  9 21:35:48 2013] Off-axis axis estimate = 5.28'
[Sun Jun  9 21:36:07 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:07 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Sun Jun  9 21:36:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Sun Jun  9 21:36:07 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.07"
[Sun Jun  9 21:36:08 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src30.ximg exists
[Sun Jun  9 21:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src30.csv
[Sun Jun  9 21:36:08 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Jun  9 21:36:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src30.csv
[Sun Jun  9 21:36:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:09 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Jun  9 21:36:09 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Jun  9 21:36:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:18 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 10.996444 pixels away
[Sun Jun  9 21:36:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:18 2013] Assessing source extent using major
[Sun Jun  9 21:36:18 2013] Source does appear to be extended
[Sun Jun  9 21:36:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:36:34 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:34 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Sun Jun  9 21:36:34 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Sun Jun  9 21:36:34 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 9.07"
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src29.ximg exists
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Jun  9 21:36:35 2013] Fit fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Jun  9 21:36:35 2013] Fit fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Jun  9 21:36:45 2013] Spatial fit model total counts = 446.180000, observed total counts = 429.000000
[Sun Jun  9 21:36:45 2013] Offset between fit and detection position for source 32 = 0.229484 pixels
[Sun Jun  9 21:36:45 2013] 459.857000 total counts/ 383.271000 bgd. counts: snr = 3.911978
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.229484 pixels
  Position = (370.8, 305.6) = 23 31 49.43 0 7 18.7
  Extent = 4.8 (3.9-6.0)", rotation angle = 0
  Source counts = 76.6 +/- 21.4
  Background counts = 383.3
  Rate = 0.002 +/- 0.0006
[Sun Jun  9 21:36:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:45 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 21:36:45 2013] Source does appear to be extended
[Sun Jun  9 21:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:37:00 2013] XMMSAS src. selection expression = ellipse(32212.064440, 26537.852800, 285.906008, 285.906008, 0.000000, X, Y)
[Sun Jun  9 21:37:00 2013] Not overwriting source region fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32_src.reg
[Sun Jun  9 21:37:00 2013] Extracting stamp from image fullrun_pn_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (354, 289) - (387, 322)
[Sun Jun  9 21:37:00 2013] XMMSAS bgd. selection expression = annulus(32212.064440, 26537.852800, 476.510014, 953.020027, X, Y)
[Sun Jun  9 21:37:00 2013] Writing fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32.gif
[Sun Jun  9 21:37:53 2013] Mean detx,y = (4447.33, -1641.19) 
[Sun Jun  9 21:37:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 21:38:10 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 21:38:11 2013] Setting source spectrum file to fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jun  9 21:38:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Jun  9 21:53:45 2013] Not generating rmf since there are only 76 counts
[Sun Jun  9 21:53:45 2013] rmf not generated due to insufficient counts
[Sun Jun  9 21:56:16 2013] Updating aperture counts using extracted products
[Sun Jun  9 21:56:16 2013] Total counts from fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 123.00
[Sun Jun  9 21:56:16 2013] Total counts from fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32_bgd.pi.gz = 354.00
[Sun Jun  9 21:56:16 2013] Got source and background scale factors 252800.000000, 1749965.000000
[Sun Jun  9 21:56:16 2013] User source parameters:
  Position = (370.8, 305.6) = 23 31 49.43 0 7 18.7
  Extent = 4.8 (3.9-6.0)", rotation angle = 0
  Source aperture counts = 71.9 +/- 12.1
  Background aperture counts = 51.1
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 21:56:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 21:56:17 2013] Using photon index=1.80, rate=0.00226, arf fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32.arf
[Sun Jun  9 21:56:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 21:56:17 2013] Updating source flux to 9.2e-15
[Sun Jun  9 21:56:32 2013] Source 32 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 21:56:34 2013] xmm0652401401/analysis//spectral/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete