[Sun Jun  9 21:35:48 2013] Detection parameters:
  Position = (297.5, 429.3) = 23 32 10.68 0 16 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 13.4
  Background counts = 51.6
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 21:35:48 2013] Off-axis axis estimate = 9.49'
[Sun Jun  9 21:36:07 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:07 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Sun Jun  9 21:36:07 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.929
[Sun Jun  9 21:36:07 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.17"
[Sun Jun  9 21:36:08 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jun  9 21:36:08 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jun  9 21:36:08 2013] Fit fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_src22 appears to have run properly
[Sun Jun  9 21:36:09 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun  9 21:36:09 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun  9 21:36:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:18 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.688268 pixels away
[Sun Jun  9 21:36:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:18 2013] Assessing source extent using major
[Sun Jun  9 21:36:18 2013] Source does appear to be extended
[Sun Jun  9 21:36:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:36:34 2013] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:34 2013] Initial guess for spatial extent in simple fitting = 11.17"
[Sun Jun  9 21:36:34 2013] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.929
[Sun Jun  9 21:36:34 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 11.17"
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun  9 21:36:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src21.csv
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun  9 21:36:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src21.csv
[Sun Jun  9 21:36:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun  9 21:36:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun  9 21:36:35 2013] fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun  9 21:36:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun  9 21:36:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:45 2013] Spatial fit model total counts = 410.400000, observed total counts = 339.000000
[Sun Jun  9 21:36:45 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 21:36:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:45 2013] Assessing source extent using major
[Sun Jun  9 21:36:45 2013] Source does appear to be extended
[Sun Jun  9 21:36:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:37:00 2013] XMMSAS src. selection expression = ellipse(25837.140900, 37304.414215, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 21:37:00 2013] Not overwriting source region fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src.reg
[Sun Jun  9 21:37:00 2013] Extracting stamp from image fullrun_pn_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (260, 392) - (335, 467)
[Sun Jun  9 21:37:00 2013] XMMSAS bgd. selection expression = annulus(25837.140900, 37304.414215, 1087.500000, 2175.000000, X, Y) && !ellipse(24476.536621, 35420.522247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25403.399384, 40029.618591, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 21:37:00 2013] Writing fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24.gif
[Sun Jun  9 21:37:04 2013] ../../xmm0652401401/products/events/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0652401401/products/events/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sun Jun  9 21:37:04 2013] Mean detx,y = (-5635.93, -8873.92) 
[Sun Jun  9 21:37:04 2013] ../../xmm0652401401/products/images/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src.img and ../../xmm0652401401/products/images/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Sun Jun  9 21:37:04 2013] ../../xmm0652401401/products/spectra/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0652401401/products/spectra/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sun Jun  9 21:37:04 2013] Setting source spectrum file to fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun  9 21:37:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jun  9 21:37:04 2013] ../../xmm0652401401/products/lightcurves/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0652401401/products/lightcurves/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sun Jun  9 21:51:52 2013] Not generating rmf since there are only 78 counts
[Sun Jun  9 21:51:52 2013] rmf not generated due to insufficient counts
[Sun Jun  9 21:56:14 2013] Updating aperture counts using extracted products
[Sun Jun  9 21:56:14 2013] Total counts from fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 242.00
[Sun Jun  9 21:56:14 2013] Total counts from fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1552.00
[Sun Jun  9 21:56:14 2013] Got source and background scale factors 1079320.000000, 9028930.000000
[Sun Jun  9 21:56:14 2013] User source parameters:
  Position = (297.5, 429.3) = 23 32 10.68 0 16 18.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 56.5 +/- 16.6
  Background aperture counts = 185.5
  Rate = 0.002 +/- 0.0005

[Sun Jun  9 21:56:14 2013] Updating counts from extracted products
[Sun Jun  9 21:56:14 2013] Set source signif. to 56.47/13.62 = 4.15
[Sun Jun  9 21:56:17 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 21:56:17 2013] Using photon index=1.80, rate=0.00167, arf fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24.arf
[Sun Jun  9 21:56:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 21:56:17 2013] Updating source flux to 1e-14
[Sun Jun  9 21:56:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 21:56:34 2013] xmm0652401401/analysis//spectral/fullrun_pn_xmm0652401401_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete