[Sun Jun  9 21:35:49 2013] Detection parameters:
  Position = (364.2, 211.9) = 23 31 51.35 0 0 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.2 +/- 19.5
  Background counts = 26.6
  Rate = 0.009 +/- 0.0008

[Sun Jun  9 21:35:50 2013] Off-axis axis estimate = 7.88'
[Sun Jun  9 21:36:10 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 21:36:10 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Sun Jun  9 21:36:10 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Sun Jun  9 21:36:10 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.37"
[Sun Jun  9 21:36:10 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src2.csv
[Sun Jun  9 21:36:10 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src2.csv
[Sun Jun  9 21:36:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:10 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun  9 21:36:10 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun  9 21:36:10 2013] Fit fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jun  9 21:36:25 2013] Spatial fit model total counts = 326.440000, observed total counts = 320.000000
[Sun Jun  9 21:36:25 2013] Offset between fit and detection position for source 4 = 0.012430 pixels
[Sun Jun  9 21:36:25 2013] 334.063000 total counts/ 164.895000 bgd. counts: snr = 13.173903
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.012430 pixels
  Position = (364.2, 211.9) = 23 31 51.35 0 0 31.3
  Extent = 5.7 (4.8-6.6)", rotation angle = 0
  Source counts = 169.2 +/- 18.3
  Background counts = 164.9
  Rate = 0.005 +/- 0.0005
[Sun Jun  9 21:36:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:25 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 21:36:25 2013] Source does appear to be extended
[Sun Jun  9 21:36:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:36:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:36 2013] Initial guess for spatial extent in simple fitting = 5.73"
[Sun Jun  9 21:36:36 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.213
[Sun Jun  9 21:36:36 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.73"
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun  9 21:36:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src2.csv
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun  9 21:36:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src2.csv
[Sun Jun  9 21:36:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun  9 21:36:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun  9 21:36:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun  9 21:36:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:51 2013] Warning, spatial fit 2 centroid is now closest to src. 13
[Sun Jun  9 21:36:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 21:36:51 2013] Source does appear to be extended
[Sun Jun  9 21:36:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:55:15 2013] XMMSAS src. selection expression = ellipse(31637.923360, 18389.023400, 343.542610, 343.542610, 0.000000, X, Y)
[Sun Jun  9 21:55:15 2013] Not overwriting source region fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun  9 21:55:15 2013] Extracting stamp from image fullrun_mos2_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (344, 192) - (384, 232)
[Sun Jun  9 21:55:15 2013] XMMSAS bgd. selection expression = annulus(31637.923360, 18389.023400, 572.571016, 1145.142033, X, Y)
[Sun Jun  9 21:55:15 2013] Writing fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4.gif
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/events/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0652401401/products/events/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun Jun  9 21:55:16 2013] Mean detx,y = (-7121.86, -6125.15) 
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/images/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0652401401/products/images/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/spectra/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0652401401/products/spectra/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun Jun  9 21:55:16 2013] Setting source spectrum file to fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun  9 21:55:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/lightcurves/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0652401401/products/lightcurves/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun Jun  9 21:55:19 2013] fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4.rmf exists, delete to re-create
[Sun Jun  9 21:55:19 2013] fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Sun Jun  9 21:56:20 2013] Updating aperture counts using extracted products
[Sun Jun  9 21:56:20 2013] Total counts from fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 193.00
[Sun Jun  9 21:56:20 2013] Total counts from fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 181.00
[Sun Jun  9 21:56:20 2013] Got source and background scale factors 369600.000000, 2580600.000000
[Sun Jun  9 21:56:20 2013] User source parameters:
  Position = (364.2, 211.9) = 23 31 51.35 0 0 31.3
  Extent = 5.7 (4.8-6.6)", rotation angle = 0
  Source aperture counts = 167.1 +/- 14.9
  Background aperture counts = 25.9
  Rate = 0.005 +/- 0.0004

[Sun Jun  9 21:56:23 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 21:56:23 2013] Using photon index=1.80, rate=0.00461, arf fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4.arf
[Sun Jun  9 21:56:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 21:56:23 2013] Updating source flux to 8.2e-14
[Sun Jun  9 21:56:32 2013] xmm0652401401/analysis//spectral/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete