[Sun Jun  9 21:35:50 2013] Detection parameters:
  Position = (431.8, 336.4) = 23 31 31.73 0 9 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 11.2
  Background counts = 28.4
  Rate = 0.002 +/- 0.0005

[Sun Jun  9 21:35:50 2013] Off-axis axis estimate = 10.06'
[Sun Jun  9 21:36:10 2013] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:10 2013] Initial guess for spatial extent in simple fitting = 11.46"
[Sun Jun  9 21:36:10 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.069
[Sun Jun  9 21:36:10 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 11.46"
[Sun Jun  9 21:36:10 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src14.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src14.csv
[Sun Jun  9 21:36:10 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src14.csv
[Sun Jun  9 21:36:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:11 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Jun  9 21:36:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jun  9 21:36:11 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Jun  9 21:36:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Jun  9 21:36:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:25 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.722478 pixels away
[Sun Jun  9 21:36:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:25 2013] Assessing source extent using major
[Sun Jun  9 21:36:25 2013] Source does appear to be extended
[Sun Jun  9 21:36:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:36:36 2013] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:36 2013] Initial guess for spatial extent in simple fitting = 11.46"
[Sun Jun  9 21:36:36 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.069
[Sun Jun  9 21:36:36 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 11.46"
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun  9 21:36:37 2013] Fit fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_src14 appears to have run properly
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun  9 21:36:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun  9 21:36:37 2013] fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun  9 21:36:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun  9 21:36:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:51 2013] Spatial fit model total counts = 201.133000, observed total counts = 188.000000
[Sun Jun  9 21:36:51 2013] Offset between fit and detection position for source 16 = 0.339903 pixels
[Sun Jun  9 21:36:51 2013] 201.109600 total counts/ 166.285000 bgd. counts: snr = 2.700596
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.339903 pixels
  Position = (431.5, 336.6) = 23 31 31.82 0 9 33.4
  Extent = 8.1 (4.8-13.6)" x 3.2 (2.9-6.5)", rotation angle = 60 (222-271) degrees
  Source counts = 34.8 +/- 14.2
  Background counts = 166.3
  Rate = 0.0009 +/- 0.0004
[Sun Jun  9 21:36:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 21:36:51 2013] Source does appear to be extended
[Sun Jun  9 21:36:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.74
[Sun Jun  9 21:55:15 2013] XMMSAS src. selection expression = ellipse(37494.880600, 29232.091200, 483.077414, 192.867606, 59.618697, X, Y)
[Sun Jun  9 21:55:15 2013] Not overwriting source region fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src.reg
[Sun Jun  9 21:55:15 2013] Extracting stamp from image fullrun_mos2_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (404, 309) - (459, 364)
[Sun Jun  9 21:55:15 2013] XMMSAS bgd. selection expression = annulus(37494.880600, 29232.091200, 805.129023, 1610.258046, X, Y)
[Sun Jun  9 21:55:15 2013] Writing fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16.gif
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/events/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0652401401/products/events/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Sun Jun  9 21:55:16 2013] Mean detx,y = (-7985.91, 6128.84) 
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/images/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src.img and ../../xmm0652401401/products/images/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/spectra/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0652401401/products/spectra/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Sun Jun  9 21:55:16 2013] Setting source spectrum file to fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jun  9 21:55:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Jun  9 21:55:16 2013] ../../xmm0652401401/products/lightcurves/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0652401401/products/lightcurves/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Sun Jun  9 21:55:19 2013] Not generating rmf since there are only 34 counts
[Sun Jun  9 21:55:19 2013] rmf not generated due to insufficient counts
[Sun Jun  9 21:55:19 2013] fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Sun Jun  9 21:56:22 2013] Updating aperture counts using extracted products
[Sun Jun  9 21:56:22 2013] Total counts from fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 55.00
[Sun Jun  9 21:56:22 2013] Total counts from fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_bgd.pi.gz = 454.00
[Sun Jun  9 21:56:22 2013] Got source and background scale factors 275332.000000, 5545649.000000
[Sun Jun  9 21:56:22 2013] User source parameters:
  Position = (431.5, 336.6) = 23 31 31.82 0 9 33.4
  Extent = 8.1 (4.8-13.6)" x 3.2 (2.9-6.5)", rotation angle = 60 (222-271) degrees
  Source aperture counts = 32.5 +/- 8.5
  Background aperture counts = 22.5
  Rate = 0.0009 +/- 0.0002

[Sun Jun  9 21:56:23 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 21:56:23 2013] Using photon index=1.80, rate=0.000949, arf fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16.arf
[Sun Jun  9 21:56:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 21:56:23 2013] Updating source flux to 2.5e-14
[Sun Jun  9 21:56:28 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 21:56:32 2013] xmm0652401401/analysis//spectral/fullrun_mos2_xmm0652401401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete