[Sun Jun  9 21:35:49 2013] Detection parameters:
  Position = (328.8, 346.1) = 23 32 1.61 0 10 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.6 +/- 20.8
  Background counts = 31.0
  Rate = 0.007 +/- 0.0006

[Sun Jun  9 21:35:49 2013] Off-axis axis estimate = 4.10'
[Sun Jun  9 21:36:09 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:09 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Sun Jun  9 21:36:09 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sun Jun  9 21:36:09 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.48"
[Sun Jun  9 21:36:09 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  9 21:36:09 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src3.csv
[Sun Jun  9 21:36:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:10 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  9 21:36:10 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  9 21:36:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:21 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.956414 pixels away
[Sun Jun  9 21:36:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:21 2013] Assessing source extent using major
[Sun Jun  9 21:36:21 2013] Source does appear to be extended
[Sun Jun  9 21:36:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:36:36 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:36 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Sun Jun  9 21:36:36 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sun Jun  9 21:36:36 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.48"
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src3.csv
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src3.csv
[Sun Jun  9 21:36:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  9 21:36:36 2013] Fit fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun  9 21:36:48 2013] Spatial fit model total counts = 380.227000, observed total counts = 347.000000
[Sun Jun  9 21:36:48 2013] Offset between fit and detection position for source 7 = 0.132212 pixels
[Sun Jun  9 21:36:48 2013] 384.571000 total counts/ 229.551000 bgd. counts: snr = 10.231708
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.132212 pixels
  Position = (328.7, 346.2) = 23 32 1.65 0 10 15.2
  Extent = 4.4 (3.8-5.4)", rotation angle = 0
  Source counts = 155.0 +/- 19.6
  Background counts = 229.6
  Rate = 0.004 +/- 0.0005
[Sun Jun  9 21:36:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:48 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 21:36:48 2013] Source does appear to be extended
[Sun Jun  9 21:36:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:55:13 2013] XMMSAS src. selection expression = ellipse(28545.716200, 30067.989600, 263.338208, 263.338208, 0.000000, X, Y)
[Sun Jun  9 21:55:13 2013] Not overwriting source region fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun  9 21:55:13 2013] Extracting stamp from image fullrun_mos1_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (314, 331) - (344, 361)
[Sun Jun  9 21:55:13 2013] XMMSAS bgd. selection expression = annulus(28545.716200, 30067.989600, 438.897013, 877.794025, X, Y)
[Sun Jun  9 21:55:13 2013] Writing fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7.gif
[Sun Jun  9 21:55:13 2013] ../../xmm0652401401/products/events/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0652401401/products/events/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Jun  9 21:55:13 2013] Mean detx,y = (3460.86, -662.34) 
[Sun Jun  9 21:55:13 2013] ../../xmm0652401401/products/images/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src.img and ../../xmm0652401401/products/images/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Jun  9 21:55:13 2013] ../../xmm0652401401/products/spectra/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0652401401/products/spectra/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Jun  9 21:55:13 2013] Setting source spectrum file to fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun  9 21:55:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun  9 21:55:13 2013] ../../xmm0652401401/products/lightcurves/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0652401401/products/lightcurves/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Jun  9 21:55:15 2013] fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7.rmf exists, delete to re-create
[Sun Jun  9 21:55:15 2013] fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Sun Jun  9 21:56:18 2013] Updating aperture counts using extracted products
[Sun Jun  9 21:56:18 2013] Total counts from fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 186.00
[Sun Jun  9 21:56:18 2013] Total counts from fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 151.00
[Sun Jun  9 21:56:18 2013] Got source and background scale factors 219200.000000, 1629956.000000
[Sun Jun  9 21:56:18 2013] User source parameters:
  Position = (328.7, 346.2) = 23 32 1.65 0 10 15.2
  Extent = 4.4 (3.8-5.4)", rotation angle = 0
  Source aperture counts = 165.7 +/- 14.7
  Background aperture counts = 20.3
  Rate = 0.005 +/- 0.0004

[Sun Jun  9 21:56:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 21:56:20 2013] Using photon index=1.80, rate=0.00423, arf fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7.arf
[Sun Jun  9 21:56:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 21:56:20 2013] Updating source flux to 5.8e-14
[Sun Jun  9 21:56:28 2013] xmm0652401401/analysis//spectral/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete