[Sun Jun 9 21:35:49 2013] Detection parameters: Position = (141.0, 232.6) = 23 32 56.09 0 2 0.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 137.3 +/- 15.3 Background counts = 20.1 Rate = 0.004 +/- 0.0004 [Sun Jun 9 21:35:49 2013] Off-axis axis estimate = 12.37' [Sun Jun 9 21:36:09 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 21:36:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 9 21:36:09 2013] Initial guess for spatial extent in simple fitting = 12.62" [Sun Jun 9 21:36:09 2013] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.865 [Sun Jun 9 21:36:09 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.62" [Sun Jun 9 21:36:09 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src8.ximg exists [Sun Jun 9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src8.csv [Sun Jun 9 21:36:09 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src8_1.ximg exists [Sun Jun 9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src8.csv [Sun Jun 9 21:36:09 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 21:36:10 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Sun Jun 9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src8.csv [Sun Jun 9 21:36:10 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Sun Jun 9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src8.csv [Sun Jun 9 21:36:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 21:36:21 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.118677 pixels away [Sun Jun 9 21:36:21 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 21:36:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 21:36:21 2013] Assessing source extent using major [Sun Jun 9 21:36:21 2013] Source does appear to be extended [Sun Jun 9 21:36:21 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 21:36:36 2013] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 21:36:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 9 21:36:36 2013] Initial guess for spatial extent in simple fitting = 12.62" [Sun Jun 9 21:36:36 2013] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.865 [Sun Jun 9 21:36:36 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.62" [Sun Jun 9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src8.ximg exists [Sun Jun 9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src8_1.ximg exists [Sun Jun 9 21:36:36 2013] Fit fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src8 appears to have run properly [Sun Jun 9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Sun Jun 9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src8.csv [Sun Jun 9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Sun Jun 9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src8.csv [Sun Jun 9 21:36:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 21:36:48 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.807429 pixels away [Sun Jun 9 21:36:48 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 21:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 21:36:48 2013] Assessing source extent using major [Sun Jun 9 21:36:48 2013] Source does appear to be extended [Sun Jun 9 21:36:48 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 21:55:13 2013] XMMSAS src. selection expression = ellipse(12214.459045, 20191.088348, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 21:55:13 2013] Not overwriting source region fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src.reg [Sun Jun 9 21:55:13 2013] Extracting stamp from image fullrun_mos1_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (103, 195) - (178, 270) [Sun Jun 9 21:55:13 2013] XMMSAS bgd. selection expression = annulus(12214.459045, 20191.088348, 1087.500000, 2175.000000, X, Y) [Sun Jun 9 21:55:13 2013] Writing fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3.gif [Sun Jun 9 21:55:13 2013] ../../xmm0652401401/products/events/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0652401401/products/events/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create [Sun Jun 9 21:55:13 2013] Mean detx,y = (-12167.43, -11533.95) [Sun Jun 9 21:55:13 2013] ../../xmm0652401401/products/images/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src.img and ../../xmm0652401401/products/images/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create [Sun Jun 9 21:55:13 2013] ../../xmm0652401401/products/spectra/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0652401401/products/spectra/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create [Sun Jun 9 21:55:13 2013] Setting source spectrum file to fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Sun Jun 9 21:55:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_bgd.pi.gz [Sun Jun 9 21:55:13 2013] ../../xmm0652401401/products/lightcurves/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0652401401/products/lightcurves/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create [Sun Jun 9 21:55:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 21:55:15 2013] rmf not generated due to insufficient counts [Sun Jun 9 21:55:15 2013] fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3.arf exists, delete to re-create [Sun Jun 9 21:56:18 2013] Updating aperture counts using extracted products [Sun Jun 9 21:56:18 2013] Total counts from fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 169.00 [Sun Jun 9 21:56:18 2013] Total counts from fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 331.00 [Sun Jun 9 21:56:18 2013] Got source and background scale factors 1047400.000000, 5245105.000000 [Sun Jun 9 21:56:18 2013] User source parameters: Position = (141.0, 232.6) = 23 32 56.09 0 2 0.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 102.9 +/- 14.0 Background aperture counts = 66.1 Rate = 0.003 +/- 0.0004 [Sun Jun 9 21:56:18 2013] Updating counts from extracted products [Sun Jun 9 21:56:18 2013] Set source signif. to 102.90/8.13 = 12.66 [Sun Jun 9 21:56:20 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 21:56:20 2013] Using photon index=1.80, rate=0.00281, arf fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3.arf [Sun Jun 9 21:56:20 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 21:56:20 2013] Updating source flux to 1.1e-13 [Sun Jun 9 21:56:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 21:56:28 2013] xmm0652401401/analysis//spectral/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete