[Sun Jun  9 21:35:49 2013] Detection parameters:
  Position = (382.0, 335.8) = 23 31 46.20 0 9 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.1 +/- 13.5
  Background counts = 33.7
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 21:35:49 2013] Off-axis axis estimate = 6.63'
[Sun Jun  9 21:36:09 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:09 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Sun Jun  9 21:36:09 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.832
[Sun Jun  9 21:36:09 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.75"
[Sun Jun  9 21:36:09 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src10.csv
[Sun Jun  9 21:36:09 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun  9 21:36:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src10.csv
[Sun Jun  9 21:36:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:10 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun  9 21:36:10 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun  9 21:36:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun  9 21:36:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:21 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.891792 pixels away
[Sun Jun  9 21:36:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:21 2013] Assessing source extent using major
[Sun Jun  9 21:36:21 2013] Source does appear to be extended
[Sun Jun  9 21:36:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:36:36 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 21:36:36 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Sun Jun  9 21:36:36 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.832
[Sun Jun  9 21:36:36 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.75"
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun  9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src10.csv
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun  9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src10.csv
[Sun Jun  9 21:36:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun  9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun  9 21:36:36 2013] fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun  9 21:36:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun  9 21:36:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 21:36:48 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.891792 pixels away
[Sun Jun  9 21:36:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 21:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 21:36:48 2013] Assessing source extent using major
[Sun Jun  9 21:36:48 2013] Source does appear to be extended
[Sun Jun  9 21:36:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 21:55:13 2013] XMMSAS src. selection expression = ellipse(33182.159973, 29167.081299, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 21:55:13 2013] Not overwriting source region fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun  9 21:55:13 2013] Extracting stamp from image fullrun_mos1_xmm0652401401_pi300-10000_cl_sm2.00.img.gz, (344, 298) - (419, 373)
[Sun Jun  9 21:55:13 2013] XMMSAS bgd. selection expression = annulus(33182.159973, 29167.081299, 1087.500000, 2175.000000, X, Y) && !ellipse(34662.731750, 30264.935913, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 21:55:13 2013] Writing fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10.gif
[Sun Jun  9 21:55:14 2013] ../../xmm0652401401/products/events/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0652401401/products/events/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Jun  9 21:55:14 2013] Mean detx,y = (4495.47, 3936.26) 
[Sun Jun  9 21:55:14 2013] ../../xmm0652401401/products/images/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0652401401/products/images/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Jun  9 21:55:14 2013] ../../xmm0652401401/products/spectra/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0652401401/products/spectra/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Jun  9 21:55:14 2013] Setting source spectrum file to fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun  9 21:55:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun  9 21:55:14 2013] ../../xmm0652401401/products/lightcurves/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0652401401/products/lightcurves/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Jun  9 21:55:15 2013] Not generating rmf since there are only 92 counts
[Sun Jun  9 21:55:15 2013] rmf not generated due to insufficient counts
[Sun Jun  9 21:55:15 2013] fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun Jun  9 21:56:19 2013] Updating aperture counts using extracted products
[Sun Jun  9 21:56:19 2013] Total counts from fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 155.00
[Sun Jun  9 21:56:19 2013] Total counts from fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 730.00
[Sun Jun  9 21:56:19 2013] Got source and background scale factors 1114100.000000, 8241334.000000
[Sun Jun  9 21:56:19 2013] User source parameters:
  Position = (382.0, 335.8) = 23 31 46.20 0 9 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 56.3 +/- 13.5
  Background aperture counts = 98.7
  Rate = 0.002 +/- 0.0004

[Sun Jun  9 21:56:19 2013] Updating counts from extracted products
[Sun Jun  9 21:56:19 2013] Set source signif. to 56.32/9.93 = 5.67
[Sun Jun  9 21:56:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 21:56:20 2013] Using photon index=1.80, rate=0.00154, arf fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10.arf
[Sun Jun  9 21:56:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 21:56:20 2013] Updating source flux to 1.9e-14
[Sun Jun  9 21:56:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 21:56:28 2013] xmm0652401401/analysis//spectral/fullrun_mos1_xmm0652401401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete