[Tue May 14 03:13:23 2013] Detection parameters:
  Position = (234.7, 282.7) = 23 33 55.03 0 5 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 12.6
  Background counts = 30.5
  Rate = 0.003 +/- 0.0006

[Tue May 14 03:13:23 2013] Off-axis axis estimate = 4.76'
[Tue May 14 03:13:52 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:13:52 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Tue May 14 03:13:52 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.980
[Tue May 14 03:13:52 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.81"
[Tue May 14 03:13:53 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 14 03:13:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_src10.csv
[Tue May 14 03:13:53 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 14 03:13:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_src10.csv
[Tue May 14 03:13:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:13:54 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 14 03:13:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 14 03:13:54 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 14 03:13:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 14 03:13:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:14:08 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.231346 pixels away
[Tue May 14 03:14:08 2013] Vigneting correction estimate = 1.000000
[Tue May 14 03:14:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 03:14:08 2013] Assessing source extent using major
[Tue May 14 03:14:08 2013] Source does appear to be extended
[Tue May 14 03:14:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 03:14:28 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:14:28 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Tue May 14 03:14:28 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.980
[Tue May 14 03:14:28 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.81"
[Tue May 14 03:14:29 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 14 03:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_src10.csv
[Tue May 14 03:14:29 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 14 03:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_src10.csv
[Tue May 14 03:14:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:14:29 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 14 03:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 14 03:14:29 2013] fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 14 03:14:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 14 03:14:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:14:44 2013] Source 9 is offset by -7.600910 and 5.369289 pixels which is larger than
2 X fitted extent = 1.036386 x 1.036386, not incorporating fit results
[Tue May 14 03:14:44 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.186285 pixels away
[Tue May 14 03:14:44 2013] Vigneting correction estimate = 1.000000
[Tue May 14 03:14:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 03:14:44 2013] Assessing source extent using major
[Tue May 14 03:14:44 2013] Source does appear to be extended
[Tue May 14 03:14:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 03:15:12 2013] XMMSAS src. selection expression = ellipse(20369.544815, 24542.952179, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 03:15:12 2013] Not overwriting source region fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src.reg
[Tue May 14 03:15:12 2013] Extracting stamp from image fullrun_mos1_xmm0652401301_pi300-10000_cl_sm2.00.img.gz, (197, 245) - (272, 320)
[Tue May 14 03:15:12 2013] XMMSAS bgd. selection expression = annulus(20369.544815, 24542.952179, 1087.500000, 2175.000000, X, Y) && !ellipse(20292.133453, 23278.085602, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 03:15:12 2013] Writing fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9.gif
[Tue May 14 03:15:13 2013] ../../xmm0652401301/products/events/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0652401301/products/events/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue May 14 03:15:13 2013] Mean detx,y = (-4908.17, -5876.12) 
[Tue May 14 03:15:13 2013] ../../xmm0652401301/products/images/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src.img and ../../xmm0652401301/products/images/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue May 14 03:15:13 2013] ../../xmm0652401301/products/spectra/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0652401301/products/spectra/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue May 14 03:15:13 2013] Setting source spectrum file to fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 14 03:15:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 14 03:15:13 2013] ../../xmm0652401301/products/lightcurves/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0652401301/products/lightcurves/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue May 14 03:15:18 2013] Not generating rmf since there are only 65 counts
[Tue May 14 03:15:18 2013] rmf not generated due to insufficient counts
[Tue May 14 03:15:18 2013] fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Tue May 14 03:34:30 2013] Updating aperture counts using extracted products
[Tue May 14 03:34:30 2013] Total counts from fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 169.00
[Tue May 14 03:34:30 2013] Total counts from fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 655.00
[Tue May 14 03:34:30 2013] Got source and background scale factors 1340800.000000, 8208336.000000
[Tue May 14 03:34:30 2013] User source parameters:
  Position = (234.7, 282.7) = 23 33 55.03 0 5 47.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 62.0 +/- 14.0
  Background aperture counts = 107.0
  Rate = 0.002 +/- 0.0004

[Tue May 14 03:34:30 2013] Updating counts from extracted products
[Tue May 14 03:34:30 2013] Set source signif. to 62.01/10.34 = 5.99
[Tue May 14 03:34:33 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 03:34:33 2013] Using photon index=1.80, rate=0.00197, arf fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9.arf
[Tue May 14 03:34:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 03:34:33 2013] Updating source flux to 3e-14
[Tue May 14 03:34:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 03:34:44 2013] xmm0652401301/analysis//spectral/fullrun_mos1_xmm0652401301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete