[Mon Aug 27 05:39:57 2012] Detection parameters:
  Position = (195.8, 408.9) = 23 29 48.97 0 17 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.4 +/- 13.3
  Background counts = 10.1
  Rate = 0.003 +/- 0.0004

[Mon Aug 27 05:39:58 2012] Off-axis axis estimate = 10.94'
[Mon Aug 27 06:54:35 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 06:54:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 06:54:35 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Mon Aug 27 06:54:35 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Mon Aug 27 06:54:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.90"
[Mon Aug 27 07:24:29 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Aug 27 07:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_src9.csv
[Mon Aug 27 07:24:29 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Aug 27 07:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_src9.csv
[Mon Aug 27 07:24:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 07:24:29 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Aug 27 07:24:29 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Aug 27 07:24:29 2012] Fit fullrun_mos2_xmm0652401101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Aug 27 07:24:45 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.049951 pixels away
[Mon Aug 27 07:24:45 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 07:24:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 07:24:45 2012] Assessing source extent using major
[Mon Aug 27 07:24:45 2012] Source does appear to be extended
[Mon Aug 27 07:24:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 08:43:00 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 08:43:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 08:43:00 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Mon Aug 27 08:43:00 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Mon Aug 27 08:43:00 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.90"
[Mon Aug 27 09:07:42 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Aug 27 09:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_src9.csv
[Mon Aug 27 09:07:42 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Aug 27 09:07:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_src9.csv
[Mon Aug 27 09:07:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 09:07:43 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Aug 27 09:07:43 2012] fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Aug 27 09:07:43 2012] Fit fullrun_mos2_xmm0652401101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Aug 27 09:07:57 2012] Spatial fit model total counts = 193.999000, observed total counts = 194.000000
[Mon Aug 27 09:07:57 2012] Offset between fit and detection position for source 2 = 0.100264 pixels
[Mon Aug 27 09:07:57 2012] 194.610200 total counts/ 120.171000 bgd. counts: snr = 6.790502
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.100264 pixels
  Position = (195.7, 408.9) = 23 29 48.99 0 17 44.2
  Extent = 5.6 (4.4-7.0)", rotation angle = 0
  Source counts = 74.4 +/- 14.0
  Background counts = 120.2
  Rate = 0.002 +/- 0.0004
[Mon Aug 27 09:07:57 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 09:07:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 09:07:57 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 09:07:57 2012] Source does appear to be extended
[Mon Aug 27 09:07:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 09:33:40 2012] XMMSAS src. selection expression = ellipse(16977.212780, 35523.637000, 338.631610, 338.631610, 0.000000, X, Y)
[Mon Aug 27 09:33:40 2012] Writing source region out to fullrun_mos2_xmm0652401101_pi300-10000_pass1_cl_src2_src.reg
[Mon Aug 27 09:33:40 2012] Extracting stamp from image fullrun_mos2_xmm0652401101_pi300-10000_cl_sm2.00.img.gz, (176, 389) - (215, 428)
[Mon Aug 27 09:33:40 2012] XMMSAS bgd. selection expression = annulus(16977.212780, 35523.637000, 564.386016, 1128.772032, X, Y)
[Mon Aug 27 09:33:40 2012] Writing fullrun_mos2_xmm0652401101_pi300-10000_pass1_cl_src2.gif
[Mon Aug 27 09:35:21 2012] Mean detx,y = (13201.33, 3657.26) 
[Mon Aug 27 09:35:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 09:35:30 2012] grppha failed
[Mon Aug 27 09:35:30 2012] Setting source spectrum file to fullrun_mos2_xmm0652401101_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Aug 27 09:35:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652401101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Aug 27 09:38:41 2012] Not generating rmf since there are only 74 counts
[Mon Aug 27 09:38:41 2012] rmf not generated due to insufficient counts
[Mon Aug 27 09:39:28 2012] Updating aperture counts using extracted products
[Mon Aug 27 09:39:28 2012] Error reading totcts from fullrun_mos2_xmm0652401101_pi300-10000_pass1_cl_src2_src.pi.gz
[Mon Aug 27 09:39:28 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 09:39:30 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 09:39:31 2012] xmm0652401101/analysis//spectral/fullrun_mos2_xmm0652401101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete