[Mon Aug 27 05:39:35 2012] Detection parameters:
  Position = (372.6, 418.5) = 23 28 57.70 0 18 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.9 +/- 8.3
  Background counts = 11.8
  Rate = 0.002 +/- 0.0005

[Mon Aug 27 05:39:35 2012] Off-axis axis estimate = 10.23'
[Mon Aug 27 06:31:59 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 06:31:59 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Mon Aug 27 06:31:59 2012] source mask rpix=2.7, npix_max = 39, mask sum = 49, frac = 1.232
[Mon Aug 27 06:31:59 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.54"
[Mon Aug 27 06:54:33 2012] fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Aug 27 06:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_src13.csv
[Mon Aug 27 06:54:33 2012] fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Aug 27 06:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_src13.csv
[Mon Aug 27 06:54:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 06:54:33 2012] fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Aug 27 06:54:33 2012] fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Aug 27 06:54:33 2012] Fit fullrun_mos1_xmm0652401101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Aug 27 07:24:41 2012] Spatial fit model total counts = 157.547000, observed total counts = 158.000000
[Mon Aug 27 07:24:41 2012] Offset between fit and detection position for source 9 = 2.218131 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.218131 pixels
  Position = (374.4, 419.8) = 23 28 57.18 0 18 31.8
  Extent = 23.0 (22.9-23.1)", rotation angle = 0
  Source counts = 150.6 +/- 12.3
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
 Deleting source due to low signal-to-noise ratio