[Sun Jun 24 11:59:09 2012] Detection parameters:
  Position = (337.1, 272.6) = 23 27 42.62 0 6 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1402.6 +/- 45.0
  Background counts = 111.7
  Rate = 0.06 +/- 0.002

[Sun Jun 24 11:59:11 2012] Off-axis axis estimate = 3.37'
[Sun Jun 24 12:02:34 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 12:02:34 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Sun Jun 24 12:02:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.715
[Sun Jun 24 12:02:34 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.12"
[Sun Jun 24 12:50:18 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 24 12:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_src9.csv
[Sun Jun 24 12:50:18 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 24 12:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_src9.csv
[Sun Jun 24 12:50:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 12:50:19 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 24 12:50:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 24 12:50:19 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 24 12:50:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 24 12:50:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401001_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:07:19 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.762724 pixels away
[Sun Jun 24 14:07:19 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 14:07:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 14:07:19 2012] Assessing source extent using major
[Sun Jun 24 14:07:19 2012] Source does appear to be extended
[Sun Jun 24 14:07:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 14:07:36 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 14:07:36 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Sun Jun 24 14:07:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.715
[Sun Jun 24 14:07:36 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.12"
[Sun Jun 24 14:54:10 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 24 14:54:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 14:54:10 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 24 14:54:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_src9.csv
[Sun Jun 24 14:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 14:54:10 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 24 14:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 24 14:54:10 2012] fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 24 14:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 24 14:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652401001_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 15:56:15 2012] Source 10 is offset by 6.507273 and 6.994264 pixels which is larger than
2 X fitted extent = 4.545473 x 1.008451, not incorporating fit results
[Sun Jun 24 15:56:15 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 15:56:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 15:56:15 2012] Assessing source extent using major
[Sun Jun 24 15:56:15 2012] Source does appear to be extended
[Sun Jun 24 15:56:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 15:56:31 2012] Counts = 1402.587158, rescaling region sizes by 2.000000
[Sun Jun 24 15:56:31 2012] XMMSAS src. selection expression = ellipse(29281.534302, 23666.542938, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 24 15:56:31 2012] Writing source region out to fullrun_pn_xmm0652401001_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 24 15:56:31 2012] Extracting stamp from image fullrun_pn_xmm0652401001_pi300-10000_cl_sm2.00.img.gz, (262, 198) - (412, 348)
[Sun Jun 24 15:56:31 2012] XMMSAS bgd. selection expression = annulus(29281.534302, 23666.542938, 4350.000000, 8700.000000, X, Y) && !ellipse(33830.554200, 31173.353620, 454.136813, 454.136813, 0.000000, X, Y) && !ellipse(37029.795460, 30657.267600, 513.447215, 386.013611, 52.416200, X, Y) && !ellipse(24884.112823, 20382.935455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.568481, 14651.756027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.145260, 32103.743600, 483.974414, 483.974414, 0.000000, X, Y) && !ellipse(27245.880859, 31525.403107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.113190, 28873.764282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37875.237549, 27268.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34039.305600, 26869.046200, 501.190414, 501.190414, 0.000000, X, Y) && !ellipse(38262.558533, 25902.011230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31142.898346, 24666.355286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32729.445618, 20953.330002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26568.665192, 17854.284225, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 15:56:31 2012] Writing fullrun_pn_xmm0652401001_pi300-10000_pass1_cl_src10.gif
[Sun Jun 24 16:08:46 2012] Mean detx,y = (2857.03, 2267.39) 
[Sun Jun 24 16:08:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 16:12:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 16:12:08 2012] Setting source spectrum file to fullrun_pn_xmm0652401001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 16:12:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0652401001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 24 16:35:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 24 16:35:29 2012] rmf not generated due to insufficient counts
[Sun Jun 24 18:17:37 2012] Updating aperture counts using extracted products
[Sun Jun 24 18:17:37 2012] Error reading totcts from fullrun_pn_xmm0652401001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 18:17:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 18:17:37 2012] Using photon index=1.80, rate=0.0584, arf fullrun_pn_xmm0652401001_pi300-10000_pass1_cl_src10.arf
[Sun Jun 24 18:17:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 18:17:37 2012] Updating source flux to 1.6e-13
[Sun Jun 24 18:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting