[Wed Aug  8 22:23:31 2012] Detection parameters:
  Position = (164.7, 379.4) = 2 30 37.75 0 39 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.1 +/- 10.6
  Background counts = 12.1
  Rate = 0.002 +/- 0.0003

[Wed Aug  8 22:23:31 2012] Off-axis axis estimate = 11.33'
[Wed Aug  8 23:47:00 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 23:47:00 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Wed Aug  8 23:47:00 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.138
[Wed Aug  8 23:47:00 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.10"
[Thu Aug  9 00:23:04 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_src15.ximg exists
[Thu Aug  9 00:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_src15.csv
[Thu Aug  9 00:23:04 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Aug  9 00:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_src15.csv
[Thu Aug  9 00:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 00:23:05 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Aug  9 00:23:05 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Aug  9 00:23:05 2012] Fit fullrun_mos2_xmm0652400701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Aug  9 00:23:21 2012] Spatial fit model total counts = 169.103000, observed total counts = 169.000000
[Thu Aug  9 00:23:21 2012] Offset between fit and detection position for source 9 = 0.135655 pixels
[Thu Aug  9 00:23:21 2012] 167.932200 total counts/ 131.178000 bgd. counts: snr = 3.209050
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.135655 pixels
  Position = (164.8, 379.3) = 2 30 37.71 0 39 48.4
  Extent = 5.9 (3.9-8.5)", rotation angle = 0
  Source counts = 36.8 +/- 13.0
  Background counts = 131.2
  Rate = 0.001 +/- 0.0004
[Thu Aug  9 00:23:21 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 00:23:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 00:23:21 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 00:23:21 2012] Source does appear to be extended
[Thu Aug  9 00:23:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 01:51:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:51:04 2012] Initial guess for spatial extent in simple fitting = 5.91"
[Thu Aug  9 01:51:04 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.158
[Thu Aug  9 01:51:04 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.91"
[Thu Aug  9 02:20:46 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_src15.ximg exists
[Thu Aug  9 02:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_src15.csv
[Thu Aug  9 02:20:46 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Aug  9 02:20:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_src15.csv
[Thu Aug  9 02:20:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 02:20:46 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Aug  9 02:20:46 2012] fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Aug  9 02:20:46 2012] Fit fullrun_mos2_xmm0652400701_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Aug  9 02:21:01 2012] Warning, spatial fit 15 centroid is now closest to src. 14
[Thu Aug  9 02:21:01 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 02:21:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 02:21:01 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 02:21:01 2012] Source does appear to be extended
[Thu Aug  9 02:21:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 03:24:57 2012] XMMSAS src. selection expression = ellipse(14291.003000, 32954.823000, 354.648610, 354.648610, 0.000000, X, Y)
[Thu Aug  9 03:24:57 2012] Writing source region out to fullrun_mos2_xmm0652400701_pi300-10000_pass1_cl_src9_src.reg
[Thu Aug  9 03:24:57 2012] Extracting stamp from image fullrun_mos2_xmm0652400701_pi300-10000_cl_sm2.00.img.gz, (144, 359) - (185, 400)
[Thu Aug  9 03:24:57 2012] XMMSAS bgd. selection expression = annulus(14291.003000, 32954.823000, 591.081017, 1182.162034, X, Y) && !ellipse(14967.722600, 32021.551600, 356.067210, 356.067210, 0.000000, X, Y)
[Thu Aug  9 03:24:57 2012] Writing fullrun_mos2_xmm0652400701_pi300-10000_pass1_cl_src9.gif
[Thu Aug  9 03:29:56 2012] Mean detx,y = (14665.33, 108.39) 
[Thu Aug  9 03:29:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 03:30:04 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 03:30:04 2012] Setting source spectrum file to fullrun_mos2_xmm0652400701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Aug  9 03:30:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652400701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Aug  9 03:40:24 2012] Not generating rmf since there are only 36 counts
[Thu Aug  9 03:40:24 2012] rmf not generated due to insufficient counts
[Thu Aug  9 03:41:42 2012] Updating aperture counts using extracted products
[Thu Aug  9 03:41:42 2012] Error reading totcts from fullrun_mos2_xmm0652400701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Aug  9 03:41:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 03:41:42 2012] Using photon index=1.80, rate=0.00114, arf fullrun_mos2_xmm0652400701_pi300-10000_pass1_cl_src9.arf
[Thu Aug  9 03:41:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 03:41:42 2012] Updating source flux to 4e-14
[Thu Aug  9 03:41:57 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting