[Wed Aug  8 22:23:10 2012] Detection parameters:
  Position = (491.8, 265.0) = 2 29 2.89 0 31 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.0 +/- 10.6
  Background counts = 12.3
  Rate = 0.002 +/- 0.0003

[Wed Aug  8 22:23:10 2012] Off-axis axis estimate = 14.23'
[Wed Aug  8 23:15:13 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 23:15:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 23:15:13 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Wed Aug  8 23:15:13 2012] source mask rpix=3.1, npix_max = 52, mask sum = 55, frac = 1.053
[Wed Aug  8 23:15:13 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.54"
[Wed Aug  8 23:46:59 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_src16.ximg exists
[Wed Aug  8 23:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_src16.csv
[Wed Aug  8 23:46:59 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Aug  8 23:46:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_src16.csv
[Wed Aug  8 23:46:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 23:47:00 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Aug  8 23:47:00 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Aug  8 23:47:00 2012] Fit fullrun_mos1_xmm0652400701_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Aug  9 00:23:17 2012] Spatial fit model total counts = 163.584000, observed total counts = 160.000000
[Thu Aug  9 00:23:17 2012] Offset between fit and detection position for source 21 = 0.196829 pixels
[Thu Aug  9 00:23:17 2012] 163.846900 total counts/ 129.514000 bgd. counts: snr = 3.016839
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.196829 pixels
  Position = (491.6, 264.9) = 2 29 2.94 0 31 30.4
  Extent = 5.3 (4.0-7.6)", rotation angle = 0
  Source counts = 34.3 +/- 12.8
  Background counts = 129.5
  Rate = 0.001 +/- 0.0004
[Thu Aug  9 00:23:17 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 00:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 00:23:17 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 00:23:17 2012] Source does appear to be extended
[Thu Aug  9 00:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 01:17:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 01:17:57 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Thu Aug  9 01:17:57 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.004
[Thu Aug  9 01:17:57 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 5.35"
[Thu Aug  9 01:51:03 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_src16.ximg exists
[Thu Aug  9 01:51:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_src16.csv
[Thu Aug  9 01:51:03 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Aug  9 01:51:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_src16.csv
[Thu Aug  9 01:51:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 01:51:03 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Aug  9 01:51:03 2012] fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Aug  9 01:51:03 2012] Fit fullrun_mos1_xmm0652400701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Aug  9 02:20:57 2012] Spatial fit model total counts = 128.327000, observed total counts = 124.000000
[Thu Aug  9 02:20:57 2012] Offset between fit and detection position for source 21 = 0.004134 pixels
[Thu Aug  9 02:20:57 2012] 128.242600 total counts/ 94.184100 bgd. counts: snr = 3.509431
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.004134 pixels
  Position = (491.6, 264.9) = 2 29 2.94 0 31 30.4
  Extent = 5.3 (3.9-7.4)", rotation angle = 0
  Source counts = 34.1 +/- 11.3
  Background counts = 94.2
  Rate = 0.001 +/- 0.0004
[Thu Aug  9 02:20:58 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 02:20:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 02:20:58 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 02:20:58 2012] Source does appear to be extended
[Thu Aug  9 02:20:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 03:06:03 2012] XMMSAS src. selection expression = ellipse(42720.654400, 22996.549400, 316.812609, 316.812609, 0.000000, X, Y)
[Thu Aug  9 03:06:03 2012] Writing source region out to fullrun_mos1_xmm0652400701_pi300-10000_pass1_cl_src21_src.reg
[Thu Aug  9 03:06:03 2012] Extracting stamp from image fullrun_mos1_xmm0652400701_pi300-10000_cl_sm2.00.img.gz, (473, 247) - (510, 283)
[Thu Aug  9 03:06:03 2012] XMMSAS bgd. selection expression = annulus(42720.654400, 22996.549400, 528.021015, 1056.042030, X, Y)
[Thu Aug  9 03:06:03 2012] Writing fullrun_mos1_xmm0652400701_pi300-10000_pass1_cl_src21.gif
[Thu Aug  9 03:14:41 2012] Mean detx,y = (2608.16, 15192.86) 
[Thu Aug  9 03:14:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 03:14:50 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 03:14:50 2012] Setting source spectrum file to fullrun_mos1_xmm0652400701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Aug  9 03:14:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652400701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Aug  9 03:24:31 2012] Not generating rmf since there are only 34 counts
[Thu Aug  9 03:24:31 2012] rmf not generated due to insufficient counts
[Thu Aug  9 03:41:41 2012] Updating aperture counts using extracted products
[Thu Aug  9 03:41:41 2012] Error reading totcts from fullrun_mos1_xmm0652400701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Aug  9 03:41:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 03:41:41 2012] Using photon index=1.80, rate=0.00106, arf fullrun_mos1_xmm0652400701_pi300-10000_pass1_cl_src21.arf
[Thu Aug  9 03:41:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 03:41:41 2012] Updating source flux to 3.1e-14
[Thu Aug  9 03:41:43 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting