[Fri Jul 20 16:11:57 2012] Detection parameters:
  Position = (255.2, 248.9) = 2 28 40.94 0 30 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 670.4 +/- 33.4
  Background counts = 128.8
  Rate = 0.02 +/- 0.001

[Fri Jul 20 16:11:58 2012] Off-axis axis estimate = 4.77'
[Fri Jul 20 17:20:33 2012] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 17:20:33 2012] Initial guess for spatial extent in simple fitting = 8.81"
[Fri Jul 20 17:20:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.980
[Fri Jul 20 17:20:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.81"
[Fri Jul 20 18:06:21 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 18:06:21 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 18:06:21 2012] Fit fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jul 20 18:06:21 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 18:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 20 18:06:21 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 18:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 20 18:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652400601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 18:06:35 2012] Spatial fit model total counts = 685.073000, observed total counts = 624.000000
[Fri Jul 20 18:06:35 2012] Offset between fit and detection position for source 1 = 0.236740 pixels
[Fri Jul 20 18:06:35 2012] 692.094000 total counts/ 302.911000 bgd. counts: snr = 22.361263
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.236740 pixels
  Position = (255.1, 249.1) = 2 28 40.96 0 30 47.4
  Extent = 6.5" x 4.9", rotation angle = 54
  Source counts = 389.2 +/- 26.3
  Background counts = 302.9
  Rate = 0.01 +/- 0.0008
[Fri Jul 20 18:06:35 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 18:06:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 18:06:35 2012] Assessing source extent using major
[Fri Jul 20 18:06:35 2012] Source does appear to be extended
[Fri Jul 20 18:06:35 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Fri Jul 20 19:08:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 19:08:47 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Fri Jul 20 19:08:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.217
[Fri Jul 20 19:08:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.71"
[Fri Jul 20 19:58:23 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 19:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 19:58:23 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 19:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 19:58:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 19:58:24 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 19:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 20 19:58:24 2012] fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 19:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 20 19:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652400601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 19:58:36 2012] Spatial fit model total counts = 1157.290000, observed total counts = 619.000000
[Fri Jul 20 19:58:36 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 20 19:58:36 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 19:58:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 19:58:36 2012] Assessing source extent using major
[Fri Jul 20 19:58:36 2012] Source does appear to be extended
[Fri Jul 20 19:58:36 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Fri Jul 20 21:18:36 2012] XMMSAS src. selection expression = ellipse(22149.501907, 21623.770144, 388.345160, 296.889087, 53.813330, X, Y)
[Fri Jul 20 21:18:36 2012] Writing source region out to fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 21:18:36 2012] Extracting stamp from image fullrun_mos2_xmm0652400601_pi300-10000_cl_sm2.00.img.gz, (233, 227) - (277, 271)
[Fri Jul 20 21:18:36 2012] XMMSAS bgd. selection expression = annulus(22149.501907, 21623.770144, 647.241934, 1294.483868, X, Y) && !ellipse(23187.489538, 20818.387458, 617.933865, 365.151316, 217.692467, X, Y) && !ellipse(24206.557312, 21981.207336, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 21:18:36 2012] Writing fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 21:18:40 2012] Mean detx,y = (2731.04, -7133.88) 
[Fri Jul 20 21:18:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 21:18:58 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 21:18:58 2012] Setting source spectrum file to fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 21:18:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 21:48:01 2012] Updating aperture counts using extracted products
[Fri Jul 20 21:48:01 2012] Error reading totcts from fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 21:48:01 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:48:01 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 21:48:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:48:01 2012] Updating source flux to 2e-13
[Fri Jul 20 21:48:43 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Jul 20 21:49:16 2012] Reading fit data from xmm0652400601/analysis//spectral/fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 20 21:49:16 2012] Spectral fit parameter nH value = 8.43222e+13
[Fri Jul 20 21:49:16 2012] Spectral fit parameter PhoIndex value = 2.08728
[Fri Jul 20 21:49:16 2012] Failed to get F(0.3-8.0) from xmm0652400601/analysis//spectral/fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 21:49:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 21:49:16 2012] Using Nh = 8.4e+13, photon index=2.09, rate=0.0113, arf fullrun_mos2_xmm0652400601_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 21:49:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 21:49:16 2012] Updating source flux to 1.8e-13