[Fri Apr 27 23:59:12 2012] Detection parameters:
  Position = (336.1, 288.7) = 16 50 33.35 34 53 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.5 +/- 19.0
  Background counts = 41.0
  Rate = 0.006 +/- 0.0007

[Fri Apr 27 23:59:13 2012] Off-axis axis estimate = 2.82'
[Sat Apr 28 00:00:41 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 00:00:41 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Sat Apr 28 00:00:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Sat Apr 28 00:00:41 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 7.84"
[Sat Apr 28 00:45:35 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_src47.ximg exists
[Sat Apr 28 00:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_src47.csv
[Sat Apr 28 00:45:35 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Apr 28 00:45:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_src47.csv
[Sat Apr 28 00:45:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 00:45:35 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Apr 28 00:45:35 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Apr 28 00:45:35 2012] Fit fullrun_pn_xmm0652400201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sat Apr 28 01:27:29 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 11.251846 pixels away
[Sat Apr 28 01:27:29 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 01:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 01:27:29 2012] Assessing source extent using major
[Sat Apr 28 01:27:29 2012] Source does appear to be extended
[Sat Apr 28 01:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 01:27:29 2012] Source is confused with source 47
[Sat Apr 28 01:27:44 2012] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 01:27:44 2012] Initial guess for spatial extent in simple fitting = 7.84"
[Sat Apr 28 01:27:44 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Sat Apr 28 01:27:44 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 7.84"
[Sat Apr 28 02:13:50 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_src46.ximg exists
[Sat Apr 28 02:13:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_src46.csv
[Sat Apr 28 02:13:50 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_src46_1.ximg exists
[Sat Apr 28 02:13:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_src46.csv
[Sat Apr 28 02:13:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 02:13:50 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sat Apr 28 02:13:50 2012] fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sat Apr 28 02:13:50 2012] Fit fullrun_pn_xmm0652400201_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Sat Apr 28 03:00:04 2012] Source 48 is offset by -6.489062 and -7.279756 pixels which is larger than
2 X fitted extent = 0.919586 x 0.919586, not incorporating fit results
[Sat Apr 28 03:00:04 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 03:00:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 03:00:04 2012] Assessing source extent using major
[Sat Apr 28 03:00:04 2012] Source does appear to be extended
[Sat Apr 28 03:00:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 03:00:19 2012] XMMSAS src. selection expression = ellipse(29195.301605, 25067.137268, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr 28 03:00:19 2012] Writing source region out to fullrun_pn_xmm0652400201_pi300-10000_pass1_cl_src48_src.reg
[Sat Apr 28 03:00:19 2012] Extracting stamp from image fullrun_pn_xmm0652400201_pi300-10000_cl_sm2.00.img.gz, (299, 251) - (374, 326)
[Sat Apr 28 03:00:19 2012] XMMSAS bgd. selection expression = annulus(29195.301605, 25067.137268, 1087.500000, 2175.000000, X, Y) && !ellipse(30805.290131, 27378.807556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.628418, 28070.511719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.951800, 27854.150000, 1209.936035, 1209.936035, 0.000000, X, Y) && !ellipse(32231.006348, 26586.801697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27769.250000, 26573.495600, 307.560809, 307.560809, 0.000000, X, Y) && !ellipse(27361.425079, 26430.797485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28630.002000, 25005.188800, 427.586412, 427.586412, 0.000000, X, Y) && !ellipse(28808.947800, 22927.948600, 481.495101, 481.495101, 0.000000, X, Y)
[Sat Apr 28 03:00:19 2012] Writing fullrun_pn_xmm0652400201_pi300-10000_pass1_cl_src48.gif
[Sat Apr 28 03:20:46 2012] Mean detx,y = (2117.55, 2501.08) 
[Sat Apr 28 03:20:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr 28 03:21:06 2012] Binned source spectrum to 10 counts/bin
[Sat Apr 28 03:21:06 2012] Setting source spectrum file to fullrun_pn_xmm0652400201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sat Apr 28 03:21:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0652400201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sat Apr 28 04:06:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr 28 04:06:29 2012] rmf not generated due to insufficient counts
[Sat Apr 28 04:49:43 2012] Updating aperture counts using extracted products
[Sat Apr 28 04:49:43 2012] Error reading totcts from fullrun_pn_xmm0652400201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sat Apr 28 04:49:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 28 04:49:43 2012] Using photon index=1.80, rate=0.00621, arf fullrun_pn_xmm0652400201_pi300-10000_pass1_cl_src48.arf
[Sat Apr 28 04:49:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr 28 04:49:43 2012] Updating source flux to 1.5e-14
[Sat Apr 28 04:50:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting